SOURCE: E.E.C fuse keeps blowing in 1991 Ford Explorer
if you replaced fuel pump i would look at backward wiring when replaced and i would start at the source of work if your vehicle was working fine before replacement then 9 out of 10 it will be your fuel pump wireing
sometimes when putting wireing back together the connectors have the missing clip and in turn you can turn the wireing in both directions now where positive is touching the ground on both sides of connector kris kross problem check your work this is crucial use a test light to find the right wires where they go
SOURCE: Fuse box on 2003 Ford Focus
It is on drivers side below dash mounted on firewall ,just left of brake pedal. There might be another one under hood, a black square or rectangular shaped box.
SOURCE: 1998 Ford Explorer blinker problems
Have you checked the contacts to make sure they have good contact with the bulb base? I have a 1995 Ford Contour. The turn signal went out. I replaced the bulb and it would work when it wanted to. I checked the contacts and sure enough they weren't making good contact with the bulb. I took a screwdiver and slightly bent the contacts a little. It has worked good ever since.
SOURCE: MY (12VDC) AUXILIARY POWER DOES NOT WORK - MY
All 3 are on separate fuses.
Cab fuse panel ( passenger side kick panel, by the fuel inertia switch ) :
Instrument panel power point : Fuse # 39
Rear Power point : Fuse #37
Cigar lighter : Fuse # 41
If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
SOURCE: the AUXILIARY POWER POINT does not work in
Have a shop test the lighter plug and see if it has power and ground. If it does, whatever you have used in the lighter socket may be bad, usually there is a fuse inside the plug.
300 views
Usually answered in minutes!
×