Re-check the transmission fluid level. It's possible that the level has "settled" due to the work that you did on it, and may be low now, even though it appeared normal when first topped off.
Just a thought.
Best regards, --W/D---
what should I do!!!! I have 1993 325i bmw..transmission Light turns and won't let go past 25 mph the light turns on!!WHY..please help me...I even bought lucus and dexron III...this never happen before help me please!!! do have to clean both pans the small one and the big one..Please give a answer???
I change the transmission fliter and put new transmission fluid .... then put my foot on the gas when i hit 25 mph it start sliping my transmission light turn on... it never did that before!!!
they remove the big gasket pan and then clean it and then they put the new transmission fluid.. and the small one they never remove it... now when i give gas i up to 25 mph the light on the transmission goes on and start slipping ...why this never happen!!!
Take it back to where you had the work performed. It sounds as though they may have missed something.
--W/D--
do u think i should clean the small gasket pan!!
I'm not a transmission expert. It seems logical that if it is running worse after service than before, something performed (or not performed) when it was serviced is contributing to the problem. Let them take a closer look. If they pulled a hose loose or something simple like that, they should only be too happy to make it right, at no cost to you. Don't drive it too much until you have them look at it, as you may be damaging the transmission.
Best regards, --W/D--
×
144 views
Usually answered in minutes!
×