SOURCE: 2000 nissan altima
your cv joint is bad. Instead of fixing the cv joint it is actually easier and cheaper to have or replace the entire axle your self. Because it comes with a cv joint and you get a new axle also.
SOURCE: 2000 Lincoln LS rumble from 40 - 45 mph
I read the consumer reports found this problem with the drive shaft. My 2000 V8 has done it for 4 yesra now and no problem othen then being anoying. They fixed it in new years, but it just a hum at 40 - 50mph.
SOURCE: 2001 montero/ rumbling noise in front
There are a few things that this could be, and I see that you have replaced a few of the items that it could be but steering systems are a weird thing so here ya go:
If you got a Chilton's or Haynes manual to do this job, it states in there how much grease should be packed into the bearings. Also, making sure of the length of your CV axle.
Post more info you would like, to pass on.
SOURCE: i have an 03 nissan altima engine makes loud clicking noise
1st check the the oil level and the vehicle's oil type.(owners manuel) 5w30-10w30
10w 30 is a thicker oil and could possibly be causing this.(Moves more freely through the engine heats the oil)
SOURCE: 2002 Altima engine won't start, but key does turn in the ignition
Is there a clicking sound? The first thing that I would check is to make sure that the starter motor is getting voltage. If it is getting voltage then I would say that the motor is bad and needs to be replaced. If it is not getting voltage then it could be a bad fuse, relay, or a bad ground. All of these are probabilities. The last thing that I would check for is a bad ignition switch especially since the accessories come on.
170 views
Usually answered in minutes!
×