Question about 1988 Dodge B250

1 Answer

I need to no where my igniton control module is located at on my 1992 dodge b250 it has a 318

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,916 Answers

You have a hall effect pick up coil, it is in the distributor, under the rotor-it has a 4 wire harness that comes out of the cap and plugs into a harness-the pick up coil just lifts out, easy fix.

Posted on Jan 27, 2011

  • pro_kleencc Jan 27, 2011

    i replaced that the coil and the fuel sensor ignition sensor and pick up coil and the van still has no spark

  • mike mountain Jan 28, 2011

    just a shot in the dark, two items-there may be a fuseable link for the ignition, older chrylser products did this, or you might look in the power/fuse centers for a blown fuse or bad relay-you can swap out relays with each other to see if that cures it, if the pick up coil, coil has been changed you need to see if you have power to the terminals on top of the ignition coil when the key is on-wouldn't be the first time, but the pick up coil might be defective, and check your installation to be sure you didn't pinch a wire routing it through the cap.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of 1991 dodge ram 1500 igniton module


The ignition module is part of the engine computer.
The pickup module in the distributor could be the problem. Could be a faulty coil too.

Aug 24, 2014 | 1991 Dodge Ram 150

1 Answer

Locate ignition module on 1992 suburban gmc 1500 need to replace


CONTROL MODULE-IGNITION

1992 GMC Truck C1500 1/2ton Sub 2WD 5.7L TBI 8cyl

The Control Module-Ignition is located: Under hood, center, rear engine area, mounted in distributor

Feb 06, 2013 | 1988 Dodge B250

1 Answer

How often does the powertrain control module go out on a 2002 pt cruiser?


Then you open a fused,The ASD relay controls the fan,injector igniton switch,02 sensor,ect..You still have another fuse location that is in the diver section at the side wall

Mar 11, 2012 | Dodge Cars & Trucks

1 Answer

Igniton control module location on 96 accord 2-2 4door sadan


have a look here http://techauto.awardspace.com/ hope this helps and if you need any more info/technical data, just ask

Feb 27, 2012 | 1996 Honda Accord

2 Answers

Where is the igniton control module located at i cant find it the is a pick up coil under the distrbutor and my coil has a plug that plugs into it


In my 84 model B250, it was on the fire wall. It was a box about 1/2 thick and about 2 X 3 inch rectangle. Mine was l;ocated about center stage top in the engine compartment.

Yours may be different ....

Thanks for your visit today at FixYa.com

Jan 30, 2011 | 1988 Dodge B250

1 Answer

Where can you find the module under the hood


For 1992 Dodge Truck Dakota 4WD 5.2L FI 8cyl the Engine Control Computer is located under hood, passenger side, front side of strut tower, mounted to inner fenderwell.

Hope this helps (remember to rate this answerr).

Jan 11, 2011 | 1992 Dodge Dakota

1 Answer

Where is the computer located on a dodge stealth


For 1992 Dodge Stealth 3.0L MFI DOHC 6cyl...
* The Engine Control Computer is located: Front seating area, center, under dash, front of console, mounted on firewall
* The Control Module-Ignition is located: Under hood, driver side, upper engine area, driver side of intake manifold, mounted in engine block

Hope helps (remember rated this).

Aug 10, 2010 | 1992 Dodge Stealth

2 Answers

What cause sparkplugs not to fire


A
  1. Faulty coil/coil pack
  2. Faulty or corroded wiring
  3. Faulty spark plugs
  4. Faulty ECU
  5. No fuel in combustion chamber
  6. Faulty security system2_bing.gif, cutting ignition during operation.

Apr 30, 2010 | 1997 Dodge Intrepid

1 Answer

Heater control valve


Where is the thermostat in a dodge dakota 1992 located? Flushed it yesterday still just have heat blowinf ti side vents rather cool windsheild defrost. Maybe there is another problem?

Nov 19, 2008 | 1992 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...