Check for proper oil level in engine with dipstick if ok.then install mechanical oil pressure gauge on oil pressure sending unit to verify proper oil pressure, if pressure ok. then replace the sending unit/sensor, if pressure not ok. , you may need to remove engine oil pan to check for restriction on oil pick-up tube screen. if ok replace pump. but also check clearance on mains and connecting rods.
A flashing light is bad and is a warning that you have a serious problem-you oil is dangerously low, put oil in to the full level before you drive it again.
Check your oil level if its good try to drain some and see if it is milky in anyway from normal. or take it and have the oil changed hope this helps good luck
572 views
Usually answered in minutes!
×