Remove the wheel. then take out the lower ball joint bolt.remove the tie rod from the assembly this makes it easy to swing the assembly back and forth. using a ball joint fork insert it between the the ball joint and lower control arm and wack the end on it till the ball joint separates from the control arm. using a pry bar put it thru the control arm so you can pry down on the control arm to release the ball joint then towards the back of the control arm are 2 nuts remove these and remove the cap that they hold towards the front of the control arm is one more nut remove this one and then pull out the control arm replace in reverse order
2,339 views
Usually answered in minutes!
×