Ok i got a 1995 ford ranger 2.3L got 140k mile in it...
and my check engine light come on... and the ranger got a obd 2 in it...so i use my obd2 reader...but my reader only read 1996 or up! so what should i do? is my ranger have obd2 or obd1?
since the reader dont have 95 ranger..so i choose the 96 ranger....its come out with a code" p1443" so how can i fix it? anyone know?
If your obd2 scanner fits the connection you have obd2, obd1 connector is way differnt.
your code p1443
Control System
Canister Purge
Valve (Mechanical)
Malfunction
Monitors the fuel vapor
flow between the
engine intake manifold
and the EVAP
canister. The system
failure occurs when a
leak or blockage
between the intake
manifold, the EVAP
canister purge valve
and the EVAP canister
is detected by the
PCM.
l Pinched, blocked or
plugged fuel vapor
tubes/hoses (except
between fuel tank and
EVAP canister)
l Damaged EVAP
canister
l Disconnected, cracked
or cut fuel vapor
tubes/hoses (except
between fuel tank and
EVAP canister)
l Damaged EVAP
canister purge valve
Check for audible vacuum
noise in the engine
compartment or significant
fuel odor in the engine
compartment or near the
EVAP canister.
This link has all the codes you need.
http://rockledge.home.comcast.net/~rockledge/RangerPictureGallery/DTCs.pdf
2,071 views
Usually answered in minutes!
what reader do we use
2010 ford ranger engine light code po120
check with obd2 code reader code 0\p0164
×