Need the firing order to a 1993 chevy v6 4.3 liter i changed the intake gasket and got it out of time and cant figure out how to get it to crank back up

Watch the You Tube Video on your motor

As long as chevy hasn't changed the firing order it should be 18436572 and the distributor runs clockwise. So if the distributor is installed properly then the pin pointing toward the driver side front of the engine should be number one and that goes to number one cylinder which is the drivers side front. The cylinder banks are easy the drivers side is odd 1357 and the passenger side is even 2468 front to back.

Here is the firing order for that vehicle and engine, however, some people can not figure it out (color coding and numbers seem to be too complicated for some) and have given low ratings for this diagram, and I will probably stop giving out this firing order. Let me know if you need help to understand this diagram, or require any further assistance.

i may talk out of order but check the crank sensor i had one that acted that way.

the firing order is stamped on the side of the intake manifold - usually around the throttle body.

Check all vacuum lines to the parts that were removed

Firing Order on 2.2 liter: 1-3-4-2
Cylinder number: 1-2-3-4 from passenger to driver's side
From the coil from fire wall to radiator: #1 coil 4-1 #2 coil 3-2 Good luck and this should help you get your car running 100% again. 

Timming not set right restab dist.

You do not have the dist. in correct or plug wires are crossed. Please check wires 18436572 is firing order.

1993 chevy blazer s10 how to time it