Stability and traction control lost, abs warning light on.... Any ideas on cost of repair .....??

When the Stabilitrak and Traction Control indicators come on and stay illuminated in your 2008 Saturn Outlook, it typically indicates a problem with the vehicle's stability control system. This system helps maintain control and stability during adverse driving conditions, such as wet or slippery roads. There are several potential causes for these warning lights, and it's essential to address the issue promptly to ensure your vehicle's safety and performance. Here are some common reasons for the warning lights to stay on:

1. Wheel Speed Sensor Issues: The Stabilitrak and Traction Control systems rely on information from wheel speed sensors to determine if a wheel is slipping or losing traction. If one of these sensors is malfunctioning or dirty, it can trigger the warning lights.
2. Faulty ABS Module: The Anti-lock Braking System (ABS) module is closely related to the stability control system. If there is a problem with the ABS module, it can affect the functionality of Stabilitrak and Traction Control.
3. Damaged Wiring: Damage to the wiring that connects the wheel speed sensors to the control module can disrupt the communication and trigger the warning lights.
4. Malfunctioning Control Module: The control module responsible for the stability control system can develop faults or errors over time.
5. Brake System Issues: Problems with the vehicle's braking system, including worn brake pads, can sometimes lead to issues with the Stabilitrak system.
6. Faulty Steering Angle Sensor: The steering angle sensor is part of the stability control system. A malfunction in this sensor can lead to warning lights.
7. Low Fluid Levels: Low brake fluid levels can trigger the warning lights, as the stability control system may interpret it as a potential issue with the braking system.

To diagnose and address the problem, you should take your Saturn Outlook to a qualified mechanic or a dealership. They can perform a diagnostic scan using specialized equipment to pinpoint the exact issue that is causing the warning lights to stay on. Once the problem is identified, they can recommend the necessary repairs or replacements.
It's important not to ignore these warning lights, as the stability control system is designed to enhance vehicle safety and performance, particularly in adverse driving conditions. Addressing the issue promptly will help ensure the continued safe operation of your vehicle.

Just like with every other type of warning light, if it's on, there's a trouble code stored. Get the codes read and post the code. Then we can help.

You have damage to the front area brake system. It could be very serious but if car stops OK most likely not that serious you just won't have abs or traction control. The damage is most likely a speed sensor or something similar. I said it could be serious that is only worst case.
Here is a breakdown of what lights mean
ABS keeps your breaks from locking up
BREAK ASSIST helps your breaks
Traction control if you one wheels spin more than others system adjust wheel spiN

VWVortex.com - Traction control light flashing, losing power?

forums.vwvortex.com > ... > VW Model-Specific Forums > Golf IV R32

May 20, 2011 - 25 posts - ‎14 authors
So last night I was driving home, went around a pretty sharp turn and my traction control light started flashing for about 5 seconds, then went ... Traction control and ABS light issues
15 posts
Feb 22, 2010
E-Brake warning light stays on -- help
22 posts
Sep 27, 2004
More results from forums.vwvortex.com

Abs and Esp Lights on!? - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=333091

Oct 18, 2011 - VW MKV-A5 Golf/Jettas. ... Suddenly i noticed that the ABS and the ESP light on the dashboard was on. ... Fuel Economy: 47+ Avg (Passat DSG) 50 Avg (SE Manual) Warm Weather. ... I might suggest that your ABS and traction controlpick up their information ... A bent ring or bad sensor will set both errors. On-and off grinding on hard left and traction control light ...
Nov 3, 2015
ABS brakes activating when slowing down - wheel speed indications ...
Jan 20, 2012
More results from forums.tdiclub.com

Electronic Stability Control - Auto Diagnosis Repair Help

You have a problem with the abs an there is a code stored in the EBCM - electronic brake control module . It could be any number of thing's from a wheel speed sensor to a wiring problem or the control module or the modulation pump . As long as the light is on the ABS is deactivated . I would take it a qualified ASE certified repair shop that knows ABS systems

Don't ask people to guess when you can easily get the trouble codes read. That's ALWAYS the first step. If the light is on, a code is stored.

Dynamic Stability Control....a derivitave of ABS / Traction control. The control unit that monitors the dynamics will most likely be sensing a difference in the measured wheel speeds. Possibly defective ABS sensor, wiring, ABS exciter ring, ABS module or steering angle sensor. Can also be triggered by wheel spin.
Have a diagnostic scan done ( cost £30 - £50 approx at good local garage) to read the fault codes first. If you get a fault code relating to "ABS module pressure sensor" the module requires replacement (common issue). Used to be a £1400 job, but repair kit now available from dealer for £180 ish and 2 hours to fit.

i believe they are related to a abs problem. the car uses the abs to control the stability (braking on certain wheels when nessisary) there is probably a malfunction in the abs system that's why the light is on constantly. this would need to be looked at by a professional repair facility.