Question about 2003 Chevrolet Silverado 2500HD
I HAVE START BUT ENGINE NOT RUN,I HAVE 2 CODES P1093,U1024
Replaced fuel pump on 2003 duramx diesel, but there's no power to it?
Posted on Jan 12, 2010
Beside me fuel falls into oil .Has changed the ijectors, all gasket , not help.Pump has changed too. But problem remained
Posted on Jul 24, 2009
Fuel Rail Pressure Low During Power Enrichment
The engine control module (ECM) uses the fuel rail pressure (FRP) sensor to determine fuel pressure to the fuel injectors. This is then compared to the calculated target fuel pressure as determined by the ECM. The ECM adjusts the FRP by modulating the duty cycle of the control driver of the fuel pressure regulator. Injector pulse duration is determined by the measured rail pressure and the target injection fuel into each cylinder. If a sensor circuit malfunction is detected, or the commanded fuel injection pump flow is not within the proper range for a given engine load and speed, DTCs will be set.
DTC U1000 and U1255 Circuit Description Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. When a module receives a message for a critical operating parameter, the module records the identification number of the module which sent the message for State of Health monitoring. A critical operating parameter is one which, when not received, requires that the module use a default value for that parameter. When a module does not associate an identification number with at least one critical parameter within about five seconds of beginning serial data communication, DTC U1000 or U1255 is set. When more than one critical parameter does not have an identification number associated with it, the DTC will only be reported once. The class 2 serial data line on this vehicle is a ring/star configuration. The following modules communicate on the class 2 serial data line:
• The body control module (BCM) • The digital radio reciever • The driver door module (DDM) • The electronic brake control module (EBCM) • The front passenger door module (FPDM) • The HVAC control module • The inflatable restraint sensing and diagnostic module (SDM) • The instrument panel cluster (IPC) • The memory seat module (MSM) • The powertrain control module (PCM) • The radio • The radio amplifier • The rear seat audio (RSA) controller • The rear seat entertainment (RSE) assembly w/U42 • The rear wheel steering control module • The remote playback device-CD player w/U1S • The transfer case shift control module • The transmission control module (TCM) w/Allison transmission • The theft deterrent control module • The vehicle communication interface module (VCIM) w/UE1
Posted on Dec 09, 2008
TENGO UN PROBLEMA CON EL FILTRO DE ESCAPE DE LA SILVERADO 2007
Posted on Jun 03, 2009
Sounds like the fprv is stuck open.
Posted on Oct 31, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 29, 2017 | 2006 Chevrolet Silverado 2500HD 2WD
Feb 02, 2012 | 2004 Chevrolet Silverado 2500HD
Oct 09, 2011 | 2002 Chevrolet Silverado 2500HD
Apr 12, 2010 | 2003 Chevrolet Silverado 2500HD
Jan 28, 2010 | 2001 Chevrolet Silverado 2500HD
Sep 30, 2009 | 2007 Chevrolet Silverado 2500HD
Jun 21, 2009 | 2003 Chevrolet Silverado 2500HD
Apr 27, 2009 | 2003 Chevrolet Silverado 2500HD
9,613 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: