At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
1999 Grand Cherokee. Left turn signal does not work at all. All of the 4 ways work except the left rear. I have replaced the left rear bulbs and replaced the entire tail light assembly. Still no good. I checked the voltage at the connector that goes into the tail light assembly-no voltage. I can't find a detailed wiring diagram on the web.
Wouldn't the relay cause problems with the right turn signal or 4 ways- also note that the left rear 4 way does not workWouldn't the relay cause problems with the right turn signal or 4 ways- also note that the left rear 4 way does not work
You can't post conmments that contain an email address.
Yes a relay is the voltage here is a diaogram to help you.this is your fues box pannelYes a relay is the voltage here is a diaogram to help you.this is your fues box pannel
The turn signal works when the emergency flashers are on. Where is the relay located exactly /The turn signal works when the emergency flashers are on. Where is the relay located exactly /
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.
you might have a loose bulb in one of the lights. Check the bulbs. If you have not replaced them, replace them. Bulbs get weak after a long period. 1999 to 2010?
Put the hazard flashers on and see which one isnt working. If they work, then you may need to check them while thay are acting up. So when the left doesnt work, pull over and see which bulb isnt on. Its either the front or the rear.
I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING
I was once a fleet manager with many Jeep Grand Cherokees 1999-2002. We had TREMENDOUS problem with REAR tailight housings. It seem the tailight/signal/back-up light circuitry is embedded in the plasticx of the housing. NO WAY to repair. Replaced with a new one from Jeep. Problem gone. ( at least until the other side went bad ) Not a guarranty, but it's a good chance it has the same problem.
Generally, if a bulb has failed or is making only poor contact, the blink rate will increase since the standard blinker relay uses a thermal strip heated by current flow to the bulbs and when it is too low, it blinks rapidly and briefly.
You still have the front bulbs to check and maybe pulling the fuse for that circuit and plugging it back in might remove some corrosion from the blades.
The flasher relay is probably OK since this would affect both sides.
would the relay cause problems with the 4 ways or right turn signal?
Wouldn't the relay cause problems with the right turn signal or 4 ways- also note that the left rear 4 way does not work
×