At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
75W90NS GL-5 Gear Oil - quart, friction modifiers removed for improved synchro operation, for transmissions and transaxles like Subaru and Porsche, used in differentials where aggressive limited slip is desired
Brand: Red Line Oil, Mfr Part#: 58304
Park on level surface. Drain the oil and replace the filter. Add 4 quarts of the correct weight oil. Start the engine and run for 2 minutes. Shut it off and wait 30 minutes. Check the level and add as necessary to fill it up. the 4 quarts plus what you add equals the capacity. You now know.
these are breather tubes make sure both are clear one may be plugged, make sure transfer case is not overfilled,my suggestion is to remove fluid start fresh,i'm assuming this is an automatic it should take just about 1 quart of 80-90w gear oil ,if it's a standard it will take around 4 quarts good luck
there is some good after market product you could use in they old days we used to drain a quart of oil and ad a quart trans. fluid for couple hundred mile then change oil and filter
×