Everything seems to be working in my car. it just wont start. the serpetine belt came off while i was driving on the freeway and the car died immediately. a new belt was put on. after that the motor turns but the car wont start. i also changed spark plugs and wires. checked everything and and everything seems to be working but it just wont start. please help..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As with any no start problem, have you checked for spark at the plugs and normal fuel pressure at the injectors ?
Does it crank with normal compression ?
have your alternator checked it sounds like its putting out low voltage you can do it you have a volt meter just hook it to the battery terminals you will be looking for a range of 13.5 volts to about 14 volts if your under thirteen its not enough voltage for the car to run and charge the battery at the same time.
well if the serpetene belt if frayed when was the timing belt last changed if that belt breaks it will not run and would have shut off a sign would be the engine spins over fast on some you can see the camshaft threw the hole where you add the oil if so have someone crank it over while you watch the cam
Nothing worse than a squeeking belt. Best solution is to spray WD40 all over the belt and loosen it up so that it deflects 2'' for proper tension.Problem solved,button it up and go drive it hard
×