At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Check your fuses. I'm betting if you have no tail lights, you have no dashlights either and that's a fuse. Also if you have trailer hitch & wiring, make sure trailer wiring isn't shorted or corroded
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there must be a short circuit which powers tail lights and brake lights. probably you have a dual filament bulbs which have both brake and tail light together. check for bulb, socket/or bulb housing and harness of that light.
does the high mounted brake light work? the brake switch has 2 contacts one for the high mount (LT BLUE/BLACK) and one for the tail brake lights. The tail/brake light wire is LIGHT BLUE. the main connector between the brake light switch and the tail lights is C208 which is located behind the rear seat, left side. So if there is power coming out of the brake switch OK and no power at the tail lights, check that connector. Hope this helps.
The rear tail light switch in the circuit. Remove the switch from its connect and bypass the the terminals on the connector with jumper wires and see what happens. If when you by pass the switch the tail and brake lights work you found the culprit.
The tail lights working would not necessarily mean that the brake light bulbs are good. If they are the type that have a double filament (ie: one filament for the tail light and another filament for the brake light ) the brake light filament could be bad and the tail lights still would work.
If they are either single filament type bulbs or double filament type, I would check the bulb, fuses, and contact switch on the brake pedal.
most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine
Brake light switch, located on upper brake pedal should be checked, that is most likely your brake light issue, but U say tail lights aren't working, but running lights do, tail lights and running lights I would consider to be the same, so can u clarify that for me? Let me know how the u do w/ brake light switch, and if u have issue w/ tail lights?
×