P0302,P0303,P0304;P0300 and P1399 found by the code reader on my honda CRV 2001 model.what those are means?

The OBD-II error code P1399 and P0141 for a Honda CRV 1999 are as follows:
P1399 - This code indicates that there is a problem with the misfire detection system in the vehicle. This code is often accompanied by other codes that indicate which specific cylinder is misfiring. Causes of this code could include a faulty ignition system, a clogged fuel injector, or a problem with the engine control module (ECM).
P0141 - This code indicates a malfunction in the oxygen sensor located on Bank 1, Sensor 2. This sensor measures the oxygen content in the exhaust gas after it has passed through the catalytic converter. Causes of this code could include a faulty sensor, a damaged sensor wiring harness, or a problem with the vehicle's computer.
It is recommended that you have a certified mechanic diagnose and repair these issues to ensure proper operation of your vehicle.

These numbers are OBD codes. They are misfire coding.
There is a youtube video to assist with troubleshooting.
Trouble shooting misfire Code P0300 P0301 P0302 P0303 P0304 P0305 P0306...

Good luck.
Semper Fi,
Z

Tune up(coils,plugs).transsmition,

P0300-p0304 misfire on cylinder 1-4
P1399 random cylinder misfire

po301 to po304 are miss fire codes, 301 cylinder 1, 302 cylinder 2 Etc, p1399 means that this must be a Honda manufactured vehicle. All are misfire codes, Could be plugs, wires, coils. ETC, Check and you will find the problem. God-Bless!

Change...distributor cap ..spark plug wires or spark plugs

Have you had somebody clear the codes after you installed the parts.If not the codes have to be erased by using a scan tool.

These codes are for a cylinder misfire. Take it to a pro to find out which one(s). Could be an injector or an ignition coil

http://www.obd-codes.com/

Code P1399 is specific to Honda - it is an error code for "multiple variable misfires detected". P0301-P0304 are common OBDC codes for all cars, specifically "misfire in cylinder X".

You will get the P0301-P0304 codes on your OBDC reader when you plug it in (if actually errors), but will only find the P1399 if you select Honda as the manufacturer.

Just got these errors today on my CRV 2000. Now I have to figure out what is causing two of the cylinders to misfire.