Question about 1993 BMW 3 Series
Sorry to hear this has happened to you, hopefully your son didn't get hurt.
Hopefully you can see and reach both ends of the wires he cut so you can see the wires clearly (if it's hard to see, get a flashlight).
Disconnect the battery.
You need to get barrel connectors, wire strippers and a crimper.
Here's the barrel connector: http://www.grainger.com/Grainger/3M-****-Connector-4X313?Pid=search
Here's the crimper/wire stripper combination tool: http://www.grainger.com/Grainger/3M-Heavy-Duty-Crimping-Tool-1A076?BaseItem=4X313
If you look inside the connector, you will see a piece of metal. This piece of metal will act as a "bridge" for the electricity. The crimper will squish the metal to the wire (metal to metal contact). The crimper has a color code dot in the front of the tool's mouth to show you where the barrel connector needs to go. The mouth has two places to crimp and the correct spot needs to be used to crimp correctly.
Go one by one in the crimping process so you can make sure you get this correct and not cross wire anything. Each wire has a specific color code so one end of the cut should match another end of the cut (make sure you look closely at the wire's insulation because sometimes there may be two colors on the wire's insulation). Everything should be ok as long as you pay close attention to the color codes and crimp properly.
Once you find each end of the cut wire, remove a quarter of an inch of insulation on both sides using the stripping holes found inside the crimper's handle (the quarter inch of wire should show bare metal). Take a connector and place the exposed wire into the connector (take a quick peak to make sure the wire is inside the metal tube), then take the crimper and squeeze the crimper as hard as you can where the wire and metal barrel meet. You should be able to pull on the connector without the wire coming loose. Now place the other end of the wire into the opposite side of the connector and squeeze again. Give it a tug to make sure it is on.
That's it - repeat as many times as necessary to get the ends "bridged." Once you're done, connect the battery and give it a test. You should be good to go. It's a long explanation but this is really easy to do, once you see the connector and crimper this explanation will make more sense to you.
Posted on Jan 04, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 03, 2015 | Cars & Trucks
Feb 25, 2013 | 1996 Toyota RAV4
Mar 19, 2010 | 1997 Volkswagen Golf
Aug 03, 2009 | 2000 Volkswagen Golf
Jul 17, 2009 | 1991 BMW 5 Series
Apr 28, 2009 | 1999 Volkswagen Passat
Apr 02, 2009 | Audi A3 Cars & Trucks
Oct 27, 2008 | 1998 Volkswagen Beetle
Jun 19, 2008 | 1999 Volkswagen Beetle
94 people viewed this question
Usually answered in minutes!