If it turns over and runs in the start position but stops in the run position, the problem is in the ignition circuit to the coil/s
That can be
1--failed resistor in that circuit ( lowers the 12 volts to 7.5 volts for the coil/s in the run position)
2-- faulty ignition switch not keeping contact in the run position
have an accredited auto electrician determine what is the fault
SOURCE: hyundai accent 2000
hey mate,
mine did the same thing i had to have mine chassie dyno tuned as it was floding on idel.
also have your ignition looked at my imobiliser was shoot when i got it fixed it seemed to help
cheers jade
SOURCE: Hyundai Accent 1996/7 1500
I waited for about 30-60 minutes and cranked the car again and it started....first time. Why? Still don't know!!
SOURCE: my 1996 hyundai accent wont crank at all with a good battery
first make sure your battery is good.....one possibility may be your starter.. try hit the starter with a hammer or something similar a few times then try starting it... if that works then u need to replace your starter
SOURCE: 1996 hyundai accent motor oil
5W30 motor oil that meets this standard: API Service SL (Current)
For 2004 and older automotive engines. Any major brand will meet this, you will find this on the bottle.
SOURCE: 2003 Hyundai Accent Rear Brake Noise
the rear shoes need to be cleaned and adjusted. nothing to worry about unless it annoys you too much.
65 views
Usually answered in minutes!
×