At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 9:52 https://www.youtube.com/watch?v=bUV6BZfVxDY
Jun 15, 2011 - Uploaded by 1A Auto Parts
1A Auto shows you how to repair, install, fix, change or replace a broken .... The outside door handle is broken on my HondaAccord and the child ... How To Install Replace Broken RearOutside Door Handle 1996-00 Honda ...
www.automotiveforums.com > ... > Isuzu > Rodeo ' Passport ' MU Can't open rear door Rodeo ' Passport ' MU Car Forums. ... The driver side rear door on my 95 Rodeo won't open. ... You can remove the door panel without opening the door. ... I've got a 96 Rodeo and the DS RR door was stuck as well. ... I went to aHonda dealer (lack of ISUZU dealers in my area) to get the part, it only ...
There is an access panel in the middle of the inside of the door. Remove that panel and you can get in there and open your door and findo ut what is happening.
Remove the door panel. Panel is attached to the door with clips and screws. Remove screw attached parts such as armrest and other trim. then remove panel clips by using a clip tool so as not to damage the panel. Tool can be found at any auto parts store. After loosening panel carefully remove, wires will be attached. If your switch is in one piece unplug it and insert through hole in panel if it passes right through look for evidence of a retainer. If none is found or if switch is in multiple parts, call dealer parts and ask for new switch. Unplug connector and replace switch.
The book says 1. remove power accesory switch panel by using suitable flat blade tool at front. 2. Disconnet electrical connections.
3. pry door handle plug by using small flat bladed tool
4.remove door trim handle mounting screws
5. remove door trim panel from retainers.Start at rear bottom corner and pry outward.
6. remove door panel.
KD does make a tool that will properly pry the door panel away from reainers. KD 3705 You might get by with a screwdriver.
One other thing you may need to have the window down to get the panel to come off. You will have to lift up on it once it is loose from the fastners.
Hope this helps you out.
To remove the door panel there will be 2-5 screw bolts in places like the door handle and behind switch and handle panels. Remove them then teh panel will either lift straight up or pop out if it is held with panel plugs then use a flat pry tool to pop them out.
It does sound like the regulator which is cable driven and will by basiclly held on the glass and the door with bolts. You will need to move the old motor to the new part.
You'll need to remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. If needed, you can pull back the weather
seal
(can't reuse it, but it's not that important) and you will be able to
access everything inside the door
×