How to replace timing belt for volvo xc90 2.5 turbo?

Hi ineed helf to set cam shaft timing on 2003 volvo xc 90 t9

It's not THAT big of a deal. You remove the cover over the spark plugs, then the little 10mm bolts holding the top of the cam belt cover.
Remove the cam belt cover.
Remove the front passenger side wheel and unbolt and lift up the flap to access the crank.
Turn the engine to line up the pulleys with the marks.

You'll have to unbolt the tensioner a little bit, turn it back to slacken the belt, then you unhook the belt, replace the tensioner, the idler pulley and tensioner pulley. Waterpump is a good idea at this point since it's cheap and right there.

I use whiteout to mark the belt and sprockets to ensure I get the new belt on the same way with the same amount of teeth between the sprockets and marks as the old one. Then put everything back in, then rotate the engine by a wrench on the crank pulley TWO revolutions to ensure nothing is binding and that your timing marks still line up.
If they do, you're just hanging the covers back on and you're done.

This is the VERY simple version of it, but if you have average mechanical skills, you'll be done in a morning, or a day if you're taking it slow to double/triple/quadruple check things like I do. :D

The entire kit (parts) is relatively cheap and gives you all you need.


Volvo Timing Belt and Water Pump Kit S40 S60 S80 V70 XC70 XC90 Genuine...

There are some real good websites on the Internet that master in car maintenance at a very good and affordable price.

Volvo India

Bring to dealer