"banks" refer to the sides of the engine. Bank 1 is always the same side of the engine as cylinder number one. Bank 2 is always the other side of the engine.
"Sensor" refers to upstream or downstream of the catalytic converter. Sensor 1 is upstream of the cat and sensor 2 is downstream of the cat.
Bank 1 sensor 2 would be the same side of the engine as cylinder number 1 and downstream of the catalytic converter.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
Fig. Fig. 3: Oxygen sensor-4.3L engines
Fig. Fig. 4: Oxygen sensor-5.0L and 5.7L engines
Fig. Fig. 5: Oxygen sensor-7.4L engines
Oxygen sensors are always numbered like this:
Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2
Some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2
Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.
Sensor 1 is always the upstream sensor (the one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.
Hope helps (remember to rate this).
1,293 views
Usually answered in minutes!
×