Question about 1994 Ford Crown Victoria

2 Answers

I lost my ignition key what do I do - 1994 Ford Crown Victoria

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,082 Answers

Dealer can make you a new one from the VIN number.. Or check phone book for a lock smith that does car keys.. You need to tell them Make, Model and year.
Once you have all of your information call a locksmith via the phone book or internet. Word of advice bigger phonebook ads means that typically the locksmith is able to do more than the simple line ads. Prices range due to areas. In our area a service call and key make for a mechanical non chip key start at 85-105 dollars. Chip keys range from 140-200, realize there are always exceptions but get more than one opinion if it seems unfair price. High security keys range from 200-750 dollars depending on make and model.

Posted on Dec 27, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 289 Answers

If it has an immobilizer u need to get a key cut for it and get it programed

Posted on Dec 27, 2010

  • chris_moon99 Dec 27, 2010

    How do I do that I'm lost

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I drilled out my ignition cause I lost my key I now found the key and it won't turn need help asap


you damaged the ignition switch and it will not recognize key you have to replace the tumbler and ignition switch the key acts like an electronic switch in most modern vehicles put key in and its recolonized and will turn and start vehicle ---damage to key or tumbler sets off anti theft and you have no start ---in future dont try to hot wire or pop ignition when keys are lost (thats all hollywood) go to dealer with vin and proof of ownership and they can cut you a new key

Aug 28, 2015 | Cars & Trucks

2 Answers

How can I hot wire my ford Taurus? I lost my key


Problem with hot wiring the ignition is that the vehicle will start and run but with out turning the ignition the steering wheel will be locked > I suggest a new ignition switch , you can always hammer a flat head screw driver in the ignition were the key goes and turn the ignition. Either way you will need a new ignition switch .

Apr 03, 2015 | 1994 Ford Taurus

1 Answer

Lost my remote on my 02 jeep liberty and need to


the key fob? or radio remove or what?
remote to what.

the operators manual covers this , under car keys.
the car came with 2 Fobs. lost them both now>?
RKE its called, (makes looking fact more easy)
is this car with SKIS Immoblizer option> yes./no
if yes.
SENTRY KEY IMMOBILIZER SYSTEM - IF
EQUIPPED
im reading your operators guide now.
lost that too>?
Duplication of keys may
be performed at an authorized dealer (or locksmiths) or by using the
Customer Key Programming procedure.

DIY, takes 1 key , good, called a valid key, in the below text.
You can program new keys to the system if you have two
valid keys by doing the following:
1. Cut the additional Sentry Key Transponder blank(s) to
match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and
turn the ignition switch ON for at least 3 seconds but no
longer than 15 seconds. Turn the ignition switch OFF and
remove the first key.
3. Insert the second valid key and turn the ignition
switch ON within 15 seconds. After ten seconds, a chime
will sound and the SKIS indicator light will begin to
flash. Turn the ignition switch OFF and remove the
second key.
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 seconds. After 10
seconds, a single chime will sound. The SKIS indicator
light will stop flashing, turn on for 3 seconds; then turn
off.
The new Sentry Key has been programmed. Repeat this
process to program up to a total of 8 keys.


did i guess right, the Key FOB RKE,
remove key entry fob.?

Sep 18, 2014 | 2002 Jeep Liberty

1 Answer

Ive lost my key to my 2000 ford taurus my door has a num pad on it how do i reset it


Have to see the dealer & also have an owners manual
to change the codes to what you want on the door

Ignition keys you lost?

You should have at least three keys programmed to
the ignition key detector system (First)

Aug 01, 2014 | 2000 Ford Taurus

1 Answer

Lost key and alarm dodge caravan


to reprogram new key first you need to use 2 factory program keys.place first factory key in the ignition first turn ignition on for 3 seconds. then turn off ignition then install second factory in the ignition on position for 10 seconds.when immobilizer warning lamp begins to flash a acoustic signal is emitted.within 60 seconds. switch ignition off and remove key.then insert new key and switch on for 10 seconds a acoustic signal is emitted and immobilizer warning lamp remain illuminated for 3 seconds indicating programming completed.if all fails dealership has to reprogram new keys.

Dec 17, 2012 | 2000 Dodge Caravan

1 Answer

How to remove the ignition lock on a 1994 Surburban without a key


A key code is stamped on the lock cylinder to aid in replacing lost keys.

Aug 06, 2012 | 1994 GMC Suburban

1 Answer

Lost key , any way round bypassing the computer and using a normal key and ignition


try going to your dealer to see about getting a new key first

Jun 08, 2012 | 1997 Ford Taurus

2 Answers

I lost my ignition key


A locksmith can come and pull your ignition switch and make a key for it, if you have AAA
I think they pick up part of the cost.

Apr 24, 2009 | 1986 Chevrolet Monte Carlo

1 Answer

Lost ignition key


be for you replace ignition key. try going to a ford dealer.bring your reg and see if they can punch a key out for you. if not try to find a lock smith to make a key.if no luck you can replace it the switch cost about $25.00

Mar 22, 2009 | 1994 Lincoln Town Car

Not finding what you are looking for?
1994 Ford Crown Victoria Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...