Hello, we're in need of a diagram to do the timing belt on a mazda 323 protege zm engine 99 model. If anyone could help that'd be great!!

If you have struts, it could be the struts. Bushings or spring housing could be bad too.

i dont know what codes you managed to trip but those are not proper diagnostic codes. OBDII codes will start with a letter and have four numbers (P0304, for example). these codes can be retrieved with a code reader or a scan tool.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Presuming the timing belt has not been removed or has skipped.
If the belt is removed or skipped this is an interference engine, valves and or pistons could be damaged by turning crankshaft, seek professional help.
Turn crankshaft clockwise and align timing marks (see jpg).
Face the marks (I) and (E) of the camshaft straight up, then align the timing marks with the horizontal surface on the cylinder head.
Pulley boss position pin on the crankshaft should be facing straight up.

This is only the beginning of an involved process, 3 pages in shop manual. I recommend getting a manual, many available on line. one typical Mazda 323 Protege Repair Manual 1990 2003
insure that the manual you get has info on your engine.

check the engine seat too

I would have liked to add as an attachment but could not.

Click on the following direct Link. It has the Tining Belt Diagrams that will match your specific engine. Included are instructions and directions.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/protege/2001_mazda_protege_timing_belt_diagram_marks.htm

1.6L (Zm) Engine Refer to the illustration for component location.

1. Loosen mounting bolts A, B and C.
   
2. Loosen the adjusting bolt D and remove the belt.
   

To install:

1. Installation is the reverse of removal.
   
2. Tighten mounting bolts A, B and C.
   

Location of the alternator mounting bolts and adjuster bolt D–Protégé 1.6L (ZM) engine


2.0L (Fs) Engine Refer to the illustration for component location.

1. Loosen mounting bolt A and B.
   
2. Loosen the adjusting bolt C and remove the belt.
   

To install:

1. Installation is the reverse of removal.
   
2. Adjust the belt deflection or tension by turning the adjusting bolt C.
   
3. Tighten mounting bolt A and B.
   

Alternator belt tension adjuster bolt (C)–Protégé 2.0 L (FS) engine

here you go buddy

http://forums.mazdaworld.org/index.php?showtopic=25269

http://www.2carpros.com/forum/1994-mazda-protege-replacing-a-blown-head-gasket-vt206242.html

http://www.2carpros.com/forum/2000-mazda-protege--my-timing-belt-broke-again,-oil-pressure-vt253721.html

http://www.blurtit.com/q298393.html

hope this helps.

thanks,

voodoo

Posted by Asker under 1997 Mazda Protege for their 2002 Mazda Protege 5.
Both are included Below

Click on the following free direct Link. It has the Belt Diagrams for the 1997 Mazda Protege with either the 1.5L DOHC In-Line 4-Cylinder or 1.8L DOHC In-Line 4-Cylinder Engines; along with various engine options (AC/No AC, etc.). Included are Instrucional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/1997/make/mazda/model/protege/1997_mazda_protege_drive_belt_routing_diagram.htm

Click on the following free direct Link. It has the Belt Diagrams for your 2002 Mazda Protege 5 2.0L DOHC In-Line 4-Cylinder Engine; along with various engine options (AC/No AC, etc.). Included are Instructional Diagrams for loosening (for removal) and tightening (for replacement) using the Adjustment and Locking Bolts/Nuts.
http://www.2carpros.com/car_repair_information/year/2002/make/mazda/model/protege5/2002_mazda_protege5_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Here's the page from the AutoZone online manual for replacing drive belts.