At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have 99 chevy suburban my brake lights dont work i changed the switch, checked the fuse its good cleaned the connections and checked the bulbs they still dont work
Re: I have 99 chevy suburban my brake lights dont work i...
See if there is a relay for the tail lights/brake lights. I would go ahead and install new bulbs. Make sure that you get the correct bulbs. Not many vehicles still use the old 1157's.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check your fuse on the instrument cluster and light. And it is probably your stop brake switch needs to be replaced. Just had to do the stop brake switch on 95 chevy suburban. the brake light and tail lights weren't working, had to get the switch now works. good luck I hope this helps you.
well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch
I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!
Bad or borken wire harness in the steering coloum. check power to brake switch, should have power on one side, if not check the fuse if fuse is good and you have no power then your turn signal switch or harness is bad.
the problen is probably the turn signal switch with a test light check for power at brake switch if no power check for power at turn signal switch the brake lights are incorperated through the turn signal switch
×