At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The short answer is yes, something could have bent when that gate was closed with the latch already closed. Look at the latch and make sure it wasn't jammed before you do a full replacement. If the latch is closed use a screw driver to open the latch while using the key to open the gate. Once you get the latch open try closing and locking the gate.
just get the service and repair manual from the given link but first go to the link read the description then buy and i am sure you will took help from the mechanic after buying this factory manual http://toolsnyou.com/
this could be normal operation of viscus fan hub, it is engauged when you 1st start up when cold then a minute or two out of drive way when taking off they cut out
when idling it should cut in and out also
Remove the interior trim panel which will not be easy since the gate is up ---- you can then access the lock mechanism and will probably find a bent linkage rod or a broken plastic retainer clip.
×