I have eclipse rs 2.0 with automatic trany.My light came on in my car so I scanned it told me the codes are p1767 also p0700 and p0700 pd i know p0700 is transimission control system. The car will not shift gears at all. I have also looked maintenance book i have nothing. I need help!!

P0700 transmission control system malfunction (failure)
P0732 gear 2 incorrect ratio
P0734 gear 4 incorrect ratio

Check level and conditions of fluid

P0700 Transmission Control System Malfunction OBD-II Trouble Code Technical Description Article by Dale Toalston ASE Certified Technician Transmission Control System TCS Malfunction What does that mean? Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory. This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module. Symptoms Symptoms of a P0700 DTC may include: Malfunction Indicator Lamp (MIL) illumination The transmission may exhibit drivability problems like slipping, etc. Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself. Register now to ask a question (free) Related P0700 DTC Discussions pt cruiser P0605, P0700, and P1391 What does P0605, P0700, and P1391 mean....I just put in a new catalyst on my car for smog but light engine turned back on...and I can't seem to know what is wrong ...please help me out here... 2002 Dodge Intrepid P0700 & P0841 code my code scanner come up with the codes PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the machanic i go to tells me my transmission has to be replaced bu... ODB Codes Dodge Caravan 2005 P0700 and P0522 Hello I have a 2005 Dodge caravan and need a fix for these codes please.. P0700 and P0522 came up.. basically ths is stuck in limp mode or 2nd gear.. I am thinking I need a new Transmission Control module.. but can anyone confirm that... 2001 Honda Civic accord p0700 and p0740 Hi I went to get my Honda civic check and p0700 and p0740 codes came up the car has a lil leak But however the car is not slipping or anything. it's not showing no Transmission sign issues. I wanted to know what could possibly be the problem thanks you... 2005 Dodge Caravan P0700 and P0420 I have a 2005 Dodge Grand Caravan.The other day the check engine light came on.I stopped at auto parts store and they checked codes for me.P0700 and P0420 are the codes that came up.What do these mean and why did they show up?My van is running fine.Do I need a tuneup?Or is it something else?I am hop...

Read more at: http://www.obd-codes.com/p0700
Copyright © OBD-Codes.com

Automatic transaxle fault code P0700 is a code that indicates that the transmission control module (TCM) has requested the powertrain control module (PCM) to turn on the check engine light to alert the driver that a problem has occurred in the automatic transmission. You now need to have the TCM scanned for fault codes to see what is going on and why the check engine light was requested. Reading the TCM codes requires a special scanner that all dealers have as well as transmission repair shops..

P0700 DODGE - Transaxle Control System Malfunction. Tech notesP0700 is just and informative fault code that indicates a malfunction has occurred in the automatic transmission and the TCM has requested the PCM to turn on the Check engine light you must now have the dealer scan the TCM for more codes to resolve the problem.P1698 DODGE - DTC Detected in Companion JTEC Module, These codes are related and you need the dealer to scan the system.

The P0700 means Transmission Control System (MIL Request)
P1767 means Torque Converter Clutch Circuit Malfunction
__________________
FGTech Galletto 2-Master

Hi there:
DTC P0700 - Transmission Control System Malfunction
Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory.

This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module.

Symptoms of a P0700 DTC may include:
Malfunction Indicator Lamp (MIL) illumination
The transmission may exhibit drivability problems like slipping, etc.

More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).

Possible Solutions: For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.

If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

A p0700 is a general tranny code you need to have a scan of the tranny to find out what is wrong it will be electrical but needs a complete scan most of the time trany shops have a free diagnostic, this should also show up the p0735 number which is the 5th gear incorrect ratio so its more than likely to be an electrical rather than a mechanical fault....hope this helps

the first thing i would do would be to check the trany fluid level,make sure engine is warm and then check, some of these vws dont have dip sticks to check the trany oil level,theres a procedure to check,so if yours doesnt have a dip stick you should take it somewhere and have the level checked and also check for leaks,if the trany oil is full then i would have the trany checked, also that check engine light may have something to do with the shifting problem,have the computer scanned, the codes will help you diagnose the problem,auto zone will scan it for free, there are other parts places that will also scan and give you a read out of the codes stored in the computer, hope this helps.

give me DTC code

P0700 (M)
Check Transmission DTC's
This code indicates that the EATX (Transmission controller) has an active fault and has illuminated the MIL via a BUS message. The specific fault must be acquired from the EATX via a DRBIII tool. (Input or Output Speed Sensor failures often cause this code and are a common failure part on WJ Grand Cherokees

P0750
Shift Solenoid circuit.
Note: If code P1767 (Transmission Relay Always On) is also present: Replace transmission solenoid assembly. See note provided. When transmission is in limp mode the relay that provides power to the solenoid group is switched off. This is normal and is designed to provide operation in one gear only. Engineering department suggests to replace transmission solenoid assembly anytime these two trouble codes occur together. See applicable service manual section (21) for solenoid assembly replacement directions. IMPORTANT: When performing this repair always check torque on all valvebody accumulator cover plate screws. Proper torque specification is 70 inch pounds. If any accumulator cover plate screws are damaged or missing replace the valvebody assembly. NOTE: If any other trouble codes are present do not replace solenoid assembly. See test in the applicable Transmission Diagnostic Procedures Manual

P0755
Shift Solenoid B