Need routing diagram for 1996 chevrolet silverrado 5.7 fan belt

https://www.bing.com/search?q=2001+chevrolet+tracker+belt+routing&PC=U316&FORM=CHROMN

Look at the label in the engine compartment (on radiator, fender, near fan shroud). This link will take you to a sketch of the belt routing diagram courtesy of Auto Zone for a 1500 2WD engine.
http://www.autozone.com/autozone/repairinfo/specifications/specificationsMain.jsp?childCatName=Belt+Routing+Diagram&childCatId=25300467&categoryNValue=25399999&categoryNameForTitle=External+Engine&categoryName=EXTERNAL+ENGINE&childCategoryNameForTitle=Belt+Routing+Diagram

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

I need a diagram on how to line up a timing belt for a 1996 chevy cavalier 2.4l

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.

3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.

4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.

5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.

6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

1. The fan belt routing diagram for 2004 Volkswagen Bora 1.4 16V



2. The fan belt routing diagram for 2004 Volkswagen Bora 1.6 16V



3. The fan belt routing diagram for 2004 Volkswagen Bora 1.8 Turbo




4. The fan belt routing diagram for 2004 Volkswagen Bora 2.0



5. The fan belt routing diagram for 2004 Volkswagen Bora 1.9 TDI


CS = Crankshaft
Gen = Alternator
G = Guide pulley
T = Tensioner pulley
AC = Air Conditioning
PAS = Power Assisted Steering

Your belt routing should be on a diagram on either the fan shroud, or the core support. However, this routing depends on whether or not your truck is equipped with a/c. Either way a belt routing diagram should not be difficult to locate.

this is done by locating the spring loaded tensioner and taking a 3/8" ratchet and pushing. it is only spring loaded. make sure you follow the routing diagram or if one is not handy under the hood, draw it out as to not forget. it ONLY goes on one way. make sure also that the writing on the belt, you can read it normally without having to stand on the engine. if you dont these belts have the potential to squeek like a bad pulley or belt.

Helllo there:
Simply click on the links that i have provided and the routing diagram will be there ok


2001 - 2001 CHEVROLET CAVALIER - L4 2.2L 134ci CNG FI N 5
Belts / Tensioners / Pulleys Part Number Description 5050630
Belt Routing Diagram Multiple Accessory, w/o A.C. 5050888
Belt Routing Diagram Multiple Accessory, w/A.C.