2006 gmc canyon won't start. Has a new batttery. Wait 10 minutes starts u? Is it a fuel line problem? Any advice?

Only Ford products have a reset or inertia switch.
Is the pump getting power from the pump relay ?

security issues,

Tell the dealer to try a new

Go to this sight for info and a permanent solution

http://vatspasslockpasskeysecurityhelp.yolasite.com/

You can to the Salvage Yard for a new computer, but your going to have to get it reprogram to your ignition keys, so the Passlock will start the engine. Before you go through all of that. recheck every thing, it could be your crank sensor or your ICM faulty causing your engine to shut down. Keep me posted and let me know what DTC codes you have. Note: a faulty fuel pump or dirty fuel filter will not set a DTC code. You may have a dirty fuel filter or faulty fuel pump or faulty fuel pump wire harness or fuel pump relay.

run scanner for trouble codes, some auto parts store will do this for free, check all fuses

It sounds to me like that you have several different issues with you vech and on the pass lock system will not cause all the problems listed how ever it will cause the no crank and after five min or 30 min start it is most likely the pass lock sensor unless your truck has a pk3 system (the key will have a + or pk3 stamped on it)If it is a pk3 system then it may be the theft detturent module if ton a pk3 system then most likely a pass lock sensor . Take the vech to some one that can ck for codes and find out all the codes set in the vech. This will tell a whole lot about what is going on with the vech .Im not very good on drivabilty problems. The evap leak and the mis fire will not be related to the pass lock problem.

sell the truck and get one that does not have the security system that locks out the engine starting. I wish I could but I can't for a year or so.

Could be any number of thing's . Engine management system sensors . Anything mentioned on here would be a guess . Having a qualified repair shop with the proper testing equipment viewing sensor scan data is the way to a fix . Not going by peoples guess . It could be a fuel system or ignition system prblem , engine sensor etc....
047 Engine Hard to Start or No Start Scan Data for Ignition
048 Engine Hard to Start or No Start Scan Data for Starting Problems
Takes year's to learn how to properly diagnose these systems . I have over thrity year's experience , thousand's of dollars of scan tools , diagnostic equipment etc... An ever year they come of with new stuff , I go to GM tech school 4 or 5 times a year .

MAY BE A VACUME LINE IS NOT HOOKED UP RIGHT