1. ensure that the wash fuse is ok.
2. click the ignition to on but do not start motor. and check for pump noise if not noise then suspect fuse pump, pump connection or washer switch.
3 if you can hear pump. check washer fluid bottle is not empty. check for any dirt in the bottle blocking the pump or pipe.
4 check pipes to washer jets are clear and connected.
5. check washer jets are not blocked, use a wire strand from a wire brush to clear.
is it cold? check that the fluid has not frozen in the system. get the vehicle in the warm and thaw out system once this is down top up with a good windshield antifreeze fluid.
work backwards through the sytem. disconnect water jet pipe and switch on if not fluid. move back to water container see if fluids comes or from there if so then pipes or jets are blocked.
if not pump is defective - blocked or not getting power..
i hope this was useful.
379 views
Usually answered in minutes!
×