At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do I change the driver's side headlight bulb in a...
Open hood ,over headlamp assy lens there are two L shaped metal pins locked in plastic clips.Turn pin out of clips and pull them straight up,that will unlock headhamp assy so you can remove it and get to bulbs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Lower tailgate remove two screws on side of light t15 torx or phillips remove light. middle bulb is signal.To remove bulb push release tang and turn left to remove. Good time to change all bulbs. Same on other side
You have to remove the air intake filter and then kind of reach around up in there to change it. It can be done, but is a lot of work. On the duramax, it is even harder to do the driver side because of the dual batteries. You have to remove the battery, then the battery seat plate, and undo the winshield washer fluid tank and lean it forward. Then you can just sort of reach in and change both headlights. A very big pain to change a couple of headlights, but if you want HID's.... for the average person, changing a headlight now means a trip to that garage.
I have notice that this is a common problem. The socket most of the time goes bad, I don't know why but they just do. You can pick them up at any parts store for around 5.00 each. If you don't have a volt meter and ground straps to test it right, then I would try changing the sockets out. Quick and easy. Let us know how it goes.
there are two rods that slide down from the top. you have to turn to get them out of clip then pull up. once both are out then headlight can be removed.
×