2004 Chrysler Concorde Logo
Posted on Dec 03, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How do you get the headlight bulb out of a 2004 concord

1 Answer

William Robinson

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Master 1,547 Answers
  • Posted on Dec 03, 2010
William Robinson
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Nov 29, 2010
Answers
1547
Questions
0
Helped
502579
Points
4729

You need to take out the bumper cover to either change the headlights or light bulbs
it should not take you more than 20 minutes you will notice there are few plastic clips
from the top that hold the bumper cover when you open the hood and than there are
plastic clips that you take out on both sides of the bumper cover by the wheels you
will notice them when you face the wheel of the car once you pull them out there will be one nut that needs to be unscrewed deep inside the cover straight ahead it is metal so you can't miss it and a plastic clip in the middle that you pull down from the bottom just half way down once you've done both sides the bumper cover slides out
to make it easier turn the steering wheel all the way to one side and than the other side as you will remove the hole bumper cover that will give you space to stick your
hand inside as you remove the nut and clip from inside the cover

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How to change a headlight bulb on a 1996 Chrysler Concorde. Driver side and passenger side.

Assuming you can't find access to the headlights, like a lot of newer cars, then try this:
If you don't have access to the lights under the hood. Look around the headlights outside. There must be a screw on or under the headlight mount. maybe under the bumper.

But if you have access to the bulbs now, then use gloves to replace the bulbs if they are the newer hot bulbs. A finger print on those bulbs can cause it to explode.
Some bulbs twist and turn out, others just pull out straight.
Hope this helps.
0helpful
1answer

Driver headlight not working and changed the bulb

Check backshell of connector and make sure there is not corrosion inside of connector. Wire could also be broke. Right and left headlights are on same fuse and run through same wire. I would suspect no current to connector.
0helpful
1answer

How do i change the tail light and brakelight bulbs on my 2004 concorde. is it very difficult ? what kind of tools do i need

Haven't done it in a long time but it is very straight forward. I believe the bulbs are screwed to the back wall of the trunk. Simply pull the out and change them. As a precaution, anytime I change bulbs on a car, I always wear gloves. Stops grease/oil from getting on the new bulb.
0helpful
1answer

Can you replace the just the bulbs in the 1998

Yes just the bulb.9006 is your low beam and 9005 is your high beam.They will go in from the rear.





















15helpful
1answer

Replacing my headlight bulb in my kia amanit 2004

  1. Open the hood of your KIA Amanti and look behind the headlight that has gone out. Locate the round knob on the back of the headlight.
  2. Turn the knob counterclockwise 1/4 of a turn and gently remove it from the back of the headlight. Carefully remove the electrical cable within the headlight housing that is attached to the back of the headlight bulb.
  3. Locate the metal clip that holds the light bulb in place by pushing the clip arm straight in and sliding it down. Remove the bulb from the headlight housing.
  4. Replace the old headlight bulb with new bulb. Secure it by sliding the metal clip up to hold the bulb in place. Reattach the electrical cable and replace the round knob to the back of the headlight housing.
  5. Turn on the headlights to verify that they are in working order.
0helpful
1answer

How to replace bulbs in headlights in a 1995 Chrysler Concorde

In my 2000 you have to pull the headlight assembly out.
0helpful
1answer

DHOW TO CHANGE OUT HEADLIGHT BULB ON 1996 CHRYSLER CONCORD LXI

For the bulb removal follow these steps.
-Open the hood and look behind the headlamp assembly with the burned out bulb.
-You'll see a black plastic ring about 2 inches in diameter, rotate this a quarter turn.
-Unplug the bulb, gently pulling the clip up to release the bulb.
7helpful
1answer

2000 CHRYSLER CONCORDE HEADLIGHT BULB REPLACEMENT

thought i already answered this... must have been for someone else... you should be able to access the bulb from within the engine compartment... if it's on the side of the battery you may have to remove it. do not touch the bulb with your fingers as that shortens the life of it.

Robert
0helpful
1answer

How do I remove the headlight assembly

two torx head screws per headlight, once you loosen them you will see they are very long, pull them out and the headlight should pull forward
Not finding what you are looking for?

274 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...