Anonymous Posted on Jun 25, 2008

1999 NISSAN ALTIMA KEYLESS REMOTE PROGRAMMING

I HAVE A NEW UNUSED EXTRA REMOTE THAT CAME WITH THE NEW ALTIMA. I NEED TO OBTAIN PROGRAMMING INSTRUCTIONS TO GET IT TO WORK ON MY VEHICAL

abutayeb Apr 09, 2009

Please tell me about programming keyless entry remote for Nissan Altima Model 2000.
Anonymous Mar 17, 2014

It worked at one time ,now does not It worked at one time ,now does not

1 Answer

Anonymous

Contributor 1 Answer
Posted on Jul 08, 2008

Anonymous

Contributor

Joined: Jul 08, 2008

Answers

Questions

Helped

2619

Points

1999-2003
Enter vehicle, close and lock all doors.
slowly insert and remove key from ignition 6 times within 10 seconds. The tail lamps will flash to indicate original code has been erased. Turn ignition to the ACC position.
Press any button on 1st transmitter.
Hazard lamps will flash to confirm programming.
TO enter additional transmitters, unlock then lock the doors using the power lock switch located on the driver door.
Press any button on additional transmitter (up to 4 tansmitters total possible). Hazard lamps will flash to confirm programming.
open the driver's door.
Turn ignition off.

You must re-program all existing transmitters as this process erases codes from car.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

3answers

Remote contral is not working i cant open or close

https://northcoastkeyless.com/2004-nissan-altima-keyless-entry-remote-programming-instructions
Please refer to the above website for assistance with this problem.

Read full answer

May 24, 2019 • Nissan Cars & Trucks

0helpful

1answer

Lastyear i wreck my 2005 nissan altima, i still have the keyless remote part but not the ignition key, now i have a 2004 nissan altima but no remote are they compatible

Call Nissan they have to program your old keyless remote to your new cars ECU. Unless your a computer wiz you can do so research and get the program to do it yourself. Call Nissan first.

Read full answer

Mar 07, 2016 • Nissan Cars & Trucks

0helpful

1answer

On my 2006 Nissan Altima the Key fob stopped

Take the fob off the key ring and leave at home. Does it still do funky things? If not - it is the fob and first vote is to replace the battery inside - typically a lithium cell. Or the fob itself. If still acting up with the fob away, pull the fuse for the keyless entry, count to 30 and put back. Another less likely cause is the relay - under the hood - marked Keyless entry. If you need to replace the fob, there are instructions for Nissan on numerous sites including below, I have replaced a 2003 and reprogrammed the car to recognize. 2006 Nissan Altima Keyless Entry Remote Programming Instructions...

Read full answer

Feb 21, 2018 • Cars & Trucks

0helpful

1answer

How do I program my Nissan Altima 2006 keyless remote

Hi. It's most likely a problem with the remote. Programing can only be done at the dealership

Read full answer

Feb 20, 2014 • Nissan Cars & Trucks

0helpful

1answer

I bought a new three button keyless entry remote for my 2005 Nissan Altima. I works fine other than the fact the when I lock the doors it opens the trunk how do I stop this? Do I need to re program it?

would suggest reprogramming

Read full answer

Oct 24, 2013 • 2005 Nissan Altima

0helpful

1answer

Reset code for 2005 Ford Focus keyless entry remote

So this answer is on the same topic of a 2005 Ford Focus keyless entry remote. There is no way to "reset" the code from the vehicle, however you can reprogram an existing or program a new keyless entry remote to your Ford Focus by using these simple instructions:

*** THERE ARE 2 POSSIBLE PROGRAMMING PROCEDURES. ***Procedure #1
Note: Obtain all remote transmitters for this vehicle.
Note: Do not depress the brake pedal during procedure.

Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4.
Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 3. For all other remotes.
Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Procedure #2
Note: Obtain all remote transmitters for this vehicle.1Fasten seat belts and close all doors.
Turn ignition from OFF to RUN 4 times within 6 seconds, with the 4th time ending in RUN. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
Turn ignition to OFF. Acoustic signal will sound and system warning lamp will illuminate to confirm programming mode.
Within 10 seconds, press and hold any button on the first keyless remote. Wait for acoustic sound and warning lamp to flash (confirming programming) then release button on remote. Wait 2 seconds but within 10 seconds repeat step 4. For all other remotes. If you only have one remote then continue to step 5.
Turn ignition to Crank or wait 10 seconds to end programming mode.

Read full answer

Jan 30, 2012 • 2005 Ford Focus

0helpful

1answer

I own a 2010 nissan altima. The keyless entry and keyless start up is wonderful..however I like to go surfing... i want to just take the manual key out with me to surf and leave the keyless remote in the...

Just a guess,would wrapping it in tinfoil work?A small metal box?

Read full answer

Jul 01, 2017 • Nissan Altima Cars & Trucks

0helpful

1answer

Ford Keyless Entry Remote Programming Instructions

For most Ford vehicles you can self-program the remote for keyless entry. However there are some of the newer models that require professional equipment to program the keyless entry remote. You can check out what vehicles have self programming and which ones need professional programming here: https://www.keylessentryremotefob.com/Key-Fob-Programming-Instructions-s/1856.htm

In the meantime here are the most common Ford Keyless Entry Remote programming instructions:

*** THERE ARE 2 POSSIBLE PROGRAMMING PROCEDURES. ***Procedure #1Note: Obtain all remote transmitters for this vehicle.
Note: Do not depress the brake pedal during procedure.

Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4.
Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 3. For all other remotes.
Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Procedure #2Note: Obtain all remote transmitters for this vehicle.
Fasten seat belts and close all doors.
Turn ignition from OFF to RUN 4 times within 6 seconds, with the 4th time ending in RUN. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
Turn ignition to OFF. Acoustic signal will sound and system warning lamp will illuminate to confirm programming mode.
Within 10 seconds, press and hold any button on the first keyless remote. Wait for acoustic sound and warning lamp to flash (confirming programming) then release button on remote. Wait 2 seconds but within 10 seconds repeat step 4. For all other remotes. If you only have one remote then continue to step 5.
Turn ignition to Crank or wait 10 seconds to end programming mode.

Read full answer

Nov 16, 2009 • 2005 Ford Focus

0helpful

2answers

Purchased used. have remote for keyless remote.

That you need to take it to a car stereo dealer that install NEW keyless entry's...Sorry, thats the easiest way to fix this issue.

Read full answer

Jun 14, 2009 • 1999 GMC Jimmy

1helpful

2answers

1999 lincoln con

SECTION 501-14B: Keyless Entry/Computer Operated Locks 1999 Town Car Workshop Manual GENERAL PROCEDURES Programming —Keyless Entry Keypad Code

Enter the permanent factory keyless entry keypad code.

Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds will erase all stored customer codes. The existing codes do not need to be erased to program new codes.

Enter the new five-digit keyless entry keypad code.

To associate the new code with personality positions 1, 2 or 3, press the 1/2 button within 5 seconds of entering the 5th digit of the new code for position 1 or 3/4 button for position 2 or 5/6 for position 3. The door locks will lock and unlock confirming the new code is programmed.

If another code is to be programmed, begin entering the code within 5 seconds of the last button pressed.

After all new keyless entry codes are programmed:
- Press keyless entry keypad buttons 7/8 and 9/0 at the same time to exit the program mode.
- Wait for 5 seconds; the driver door module (DDM) will exit the program mode automatically.
- -------------------------------------------------------------

Programming —Transmitter

Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming program mode has been entered.

NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
Press any button on the transmitter to be programmed.

If additional keyless entry remote transmitters are to be programmed, repeat step 2 within 7.5 seconds.

To exit program mode, turn the ignition to START or wait 7.5 seconds.

--------------------------------------------------
Programming —Remote Memory Activation NOTE: This procedure must be completed within 5 seconds.

Press the SET button on the driver door panel.

Press any button on the keyless entry remote transmitter to be associated with a memory setting.

Press the 1 or 2 memory button on the driver door panel.

-------------------------------------------------------------
Programming —Autolock and Horn Chirp

NOTE: This procedure must be completed within 30 seconds.
Turn the ignition switch to RUN.

Press the UNLOCK button three times.

Turn the ignition switch to OFF.

Press the UNLOCK button three times.

Turn the ignition switch to RUN. The doors will lock and unlock to confirm entry into program mode.

Press the UNLOCK button once to toggle the Autolock feature on or off, or twice to toggle the Horn Chirp function on or off. The horn will chirp to confirm toggling of the Autolock feature.

Exit program mode by turning the ignition to OFF, START, or wait 7.5 seconds.

----------------------------------------------------------------------------------

Read full answer

Apr 07, 2009 • 1999 Lincoln Town Car

Not finding what you are looking for?

View Most Popular

1999 Altima

Cars & Trucks

Remote contral is not working i cant open or close

Nissan Cars & Trucks

2,629 views

Ask a Question

Usually answered in minutes!

Have a manual for 1999 Nissan Altima? Or just drag it here!

Related Topics:

1999 NISSAN ALTIMA KEYLESS REMOTE PROGRAMMING