SOURCE: Broken inside door handle-1996 Chevy Silverado Extended Cab
On almost all GM's there will be a screw in the recess that the handle sits in. After removing this screw, gently wiggle this cup out of it's hole and there should be a metal rod attached to the back of it with a small clip. Unclip this and it's out - installation is the reverse. Just don't lose the clip or let the linkage rod fall down inside or you will have to remove the door panel. It shouldn't take five minutes to replace and most parts stores now carry GM door handle assemblies. Good Luck!
SOURCE: passenger door problem on 2001 chevy tracker
lock rods inside the door need to be attached and with exterior door handle broken, it will need to be replaced first. so the assembly will be complete
hope2help shack
SOURCE: cant locate the blower motor in my 2004 chevy
Pasenger side under the glove box.
replase resistor aswell.
Vitally
SOURCE: How can I manually open the rear hatch of a 2004
only if you remove the internal trim panel,cant you wangle the exterior handle with a coat hanger or push a lever with a screwdriver?=?
SOURCE: How do I replace the driver's side door handle on
Interior or exterior handle? Remove the door panel first. They make a special tool for removing the window crank, but usually you can get it off with a screwdriver. There is a little clip under the crank that needs to be removed first. Then remove the door handle itself, this has a screw in it. Then pull the panel off. With the window in the fully down position or the up position you should be able to get to the handle itself for the exterior. If it's an interior handle just remove that without taking the door handle off. This is all pretty self explanatory once you see it.
473 views
Usually answered in minutes!
×