2000 Mitsubishi Galant Logo

Related Topics:

Posted on Aug 04, 2017

My car revs goes upto 1.5 or 2000 rpm when i start it first time in the day and make lot of noise and ive noticed that when i switch my car headlights on...the revs drop down and car shakes. The other problem i have is that my car rolls a lot when take turns or overtaking ...it does left and right body rolling......and engine tempets are making lot of noise then normal idle sound of petrol engine.

5 Related Answers

Ajkill

Anand Kumar

  • 2035 Answers
  • Posted on May 27, 2008

SOURCE: won't rev past 2000 rpm

Check the computer on the car it may be programmed to run still on 2 K rpm you need to reprogram the computer on your car.......

Ad

Anonymous

  • 24 Answers
  • Posted on Mar 03, 2009

SOURCE: Car makes grinding noise when I try to start,

You may need to install what they call shims in between the starter and the flywheel in order to align it correctly with the flywheel

Anonymous

  • 249 Answers
  • Posted on Jun 19, 2009

SOURCE: my belt tensioner is lose i see it shake at idle

tension is easy, but the shaking sounds like a vacumn leak

Anonymous

  • 72 Answers
  • Posted on Jun 24, 2009

SOURCE: Eclipse GST 1997/ car running fine then terrible/ 4 codes

yes bad ecu. exat same thing happened to a freind of mine he replaced maf, coolant sensor, distributor all that came trough check engine light. and still the same and chugged gas like crazy and fans were o always. i swapped his ecu with mine n car ran perfect. so he got new ecu and here he is driving happily to this day.

it was a 96 galant 2.4 sohc with around 75,000 miles.

good luck

Anonymous

  • 65 Answers
  • Posted on Jun 25, 2009

SOURCE: On take off, the car bogs down to like 500 rpm, so

Stop driving and check your transmission fluid right away. you probably have a leak or a blocked valve body. if the fluid is up what does it smell like? and what color is it? If it sticks like burnt toast or is a dark opaque colour then get it to a shop before you get stranded somewhere.
If the fluid is up and clear pink then just schedule an appointment to get the fluids and filter changed by a trans shop , not Mr. Lube. a real trans shop. Hope this helps

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2000 Ford Windstar's RPM's 'jumping' and engine is ticking

Bad spark plug or wire. Observe it while running at night to see if spark is jumping.
0helpful
1answer

I have a 99 gmc jimmy Ive notice while i slow down for a turn my car is still trying to accelerate and only when I come to a full stop it goes back to normal Also when first starting the car it revs up to...

Vacuum leak from brake booster. If you hear a sucking noise when you press the brake pedal replace it. Another way to check it is to place truck in gear set e-brake press brake pedal repeatedly and see if idle goes up and down. DO NOT PRESS GAS PEDAL DURING TEST.
0helpful
1answer

Tickover

please try using carburretor cleaner.
start the engine and spray fron the air intake a couple of times.
please check the carburettor snokle for wear off or check that the lever that accelerates the car could be tight and gets stuck.usually if excessive air is allowed in the carburettor the rpm will increase so it has to be the carburettor.
3helpful
1answer

Revs upto 4000 rpm in idle and while driving too ! all by itslef.

mcdevito75 here, Sounds like the idle speed motor or the idle speed sensor is no good. Your local shop can check this out for you.
0helpful
1answer

Rattling noise during start up. I turn the key and there is a loud rattle noise when the car first fires up. When the car fires up it sounds like I have my foot on the accelerator as it revs up at first...

check your starter and see if it is loose, this will cause it (starter) to use more amperage to start which leaves less amperage for the rest of the electrical system (maybe the long start problem too), hope this helps, let me know
1helpful
2answers

Engine revving

try cleaning the petrol cap. it breaths round the key hole. i boiled mine. sometimes if there is not enough air in the tank. pure fule goes into the carb. and makes the car race. take fule cap and boil it in water. you can use steradent in cold water if you prefer. muck gets stuck in them.
liz.
0helpful
1answer

Cold days 94 f-150 high rpm start

probably is a emissions sensor problem, lots of these parts are plastic. check out the throttle cables, lub em wd40. there is a type of valve somewhere on top of engine, it may be cracked, pcv valve stuck. lots of possibilities, almost too much for solution online. something emmissions with an electronic sensor is acting up.
0helpful
1answer

Car takes a long time to start, won't go over 2000 RPM

could be a host of problems . but the most likely is the tps or throttle position sensor @ least that is where to start
Not finding what you are looking for?

84 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...