1994 Chevrolet Caprice Classic Logo
Anonymous Posted on Nov 28, 2010

94 caprice classic rear spider gears shot 12 or 16 possi what other rear ends are compatible for this 5.7 liter

1 Answer

Ronnie Wilson

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 1,596 Answers
  • Posted on Nov 28, 2010
Ronnie Wilson
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jan 07, 2009
Answers
1596
Questions
1
Helped
881473
Points
5626




. Axle Code >>>>>>>>>>>Standard
2YN Gear Ratio >>>>2.56<<<<< Ring Gear Diameter 8.5 Standard 2GA Gear Ratio 2.73 Ring Gear Diameter 7.6 Standard 2GB Gear Ratio 2.73 Ring Gear Diameter 7.6 Standard 2GH Gear Ratio 2.73 Ring Gear Diameter 8.5 Standard 2LW Gear Ratio 3.08 Ring Gear Diameter 8.5 Standard 2LR Gear Ratio 3.23 Ring Gear Diameter 8.5 Standard 2LY Gear Ratio 3.23 Ring Gear Diameter 8.5 Standard 2LT Gear Ratio 3.23 Ring Gear Diameter 8.5 Standard 6YF Gear Ratio 3.23 Ring Gear Diameter 8.5


Axle Code>>>>>>>>> Limited Slip
2LQ Gear Ratio >>>>>>>>2.93<<<<<<<<<<< Ring Gear Diameter 8.5 Limited Slip 2YG Gear Ratio 2.93 Ring Gear Diameter 8.5 Limited Slip 2LX Gear Ratio 3.08 Ring Gear Diameter 8.5 Limited Slip 2ND Gear Ratio 3.23 Ring Gear Diameter 8.5 Limited Slip 2LZ Gear Ratio 3.23 Ring Gear Diameter 8.5 Limited Slip 2LS Gear Ratio 3.23 Ring Gear Diameter 8.5

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I remove the rear end axle on a 1995 poly traction police issued caprice classic

First off I think you mean Posi-traction which means both axles turn with power to the wheels. You remove the axle grease from the rear end draining it then you remove the cover try and do it slowly so that you don't make getting the old gasket off really hard after cover is off you will see the rear end look inside at the pinion gears the axle goes through them you will see how they are held on just remove the pins when putting back together use some axle grease on the splined ends and make sure that the housing and the cover is really clean so that the gasket seals properly ,nothing worse than rear end oil leaking.
2helpful
1answer

Rear wheel bearings are shot. How do I pull the shaft out?

You'll have to take the back cover off the rear end and drain off the gear lube. Inside you'll see the ring gear and in front is the pinion gear. Inside the housing of the ring gear you'll see small spider gears. These spider gears run on a gear that is on the end of the axle. The end of the axle will have a C-clip or some kind of retainer. When you get the retaining divice out and the bolts out that hold the bearing housing on the vacuum plate, the bearing and axle should pull out.
0helpful
1answer

My 94 caprice looses power going up hills and I smell gas fumes

My gfs car is doing exactly that, 94 caprice classic, you find out yet?
5helpful
1answer

Firing order 1990 chev caprice, doesn't start

You have foru engine sizes there, check the next diagrams...


1990 Chevrolet Caprice 4.3 liter V-6 VIN "Z"

018b8cd.gif


1990 Chevrolet Caprice 5.0 liter V-8 (305)

d688e86.gif


1990 Chevrolet Caprice 5.0 liter V-8 (307)

1a7365e.gif


1990 Chevrolet Caprice Classic 5.7 liter V-8 VIN "7"

e7f6dda.gif


Hope helps with this (remember rated this).
6helpful
1answer

Fuel filter location on a 1996 caprice classic w/ 5.7 liter engine

Under vehicle, driver side, below seating area, front of rear wheelwell, mounted on chassis in fuel line.  Thank you for an honest rating and for using FixYa!
0helpful
1answer

99 CHEVY TAHOE AND WANT TO REPLACE MY REAR END WITH DISC BRAKES

98 Z71 Chevy rear end will work on this. You may need to get a kit to install disc
0helpful
1answer

DIFFERENTIAL REPAIR

if you haven't takin the pumpkin cover of do so and there is a retaining clip for each axle on the end of them inside the pumpkinto get to them in non possy you have to take a pin out of the differential once you do tha take the clips off and turn one of the axles and the spider gears just fall out
Not finding what you are looking for?

504 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...