Hi i have a VW Jetta 2006 and the front side light bulb has just gone. I can see where it is from behind the lens but find it difficult to access. Do i need to dismantle covers etc to gain proper access or is it meant to be accssed via the circular hole beneath the rubber cover?? thanks in appreciation...........

SOURCE: 2006 jetta tdi

How to remove a coin from CD slot in VW Jetta 2006 tdi

SOURCE: 2000 VW jetta; what is the torque for valve cover and plenum

I briefly looked online and did not see any info direct6ly relating to the torque spec of the cover bolts. I would guess around 15 ft lbs.--not too much--the head is aluminium--best way to go is to walk up to the service counter of the VW dealer and ask him to provide that information. You have the car and they built it!

SOURCE: 2006 vw jetta tdi service engine light reset

With the key in the ignition (but not turned), press and hold the Odometer Reset Button on the right hand side of the panel. While still holding that button, turn the key (although not far enough to start the engine) and then press and hold the Minute button on the left side of the instrument pane(if pressing doesnt work try turning the knob clockwise until service light has gone off and skip the pressing)l. Release both buttons at the same time.

SOURCE: 2004 VW Passat front marker light bulb

Push in on the rear side of the light and slide the whole assembly to the rear.

it is hard to do.

SOURCE: 1995 VW jetta 2.0 leaking valve cover

You'll need to remove the intake plenum, unplug and label any hoses and connectors. Number and remove the spark plug wires at the plugs. Unbolt the valve cover. Clean everything well. Reinstall. Tighten vavle cover bolts from the center, out.