A lean bank 1 and 2 is indicating there is not enough fuel being injected to support proper combustion.
Leading causes can include but are not limited to......
1) low fuel pressure or plugged fuel filter.
2) vacuum leak causing lean condition.
3) air intake hose or crank case not sealed properly and bypassing the MAF sensor or the MAF sensor element is dirty.
4) wrong fuel or poor quality fuel used.
Hope this helps. If the Service Engine Soon light is illuminated, there will be fault codes associated the light. Get the vehicle scanned for free at your local Auto Zone or Advanced Auto and report back.
I had it checked n that's what they told me but they want to charge alot for the bank 1n bank 2 the codes were P0171 P0174 P1516
What is thier proposed fix for the lean bank 1 and 2?
Tune up an air flow sensor
If all I stated in my original solution has been checked and there conclusion was a tune up and a mass air flow sensor replacement, then it is possible that may take care of the problem.
Good luck.
I have a girl question what is the RPM go up to when you take off after being at a complete stop Nan what is to high???
×
725 views
Usually answered in minutes!
×