At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Fuse 1-A (10 amp mini-fuse) located in the fuse panel under the instrument panel, and fuse # 2 (60 amp maxi-fuse) located in the right hand side under-hood fuse block.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The main fuse on the JCB 8014 mini digger is typically located near the battery or the starter motor. Here are some steps you can take to locate the main fuse:
Locate the battery: The main fuse is usually located near the battery or the starter motor. Locate the battery and follow the cables that are connected to it.
Follow the cables: Trace the cables that are connected to the battery and look for a fuse holder along the way. The fuse holder should be a small plastic box with a lid that can be opened.
Check the manual: If you have the owner's manual for the JCB 8014 mini digger, check the fuse diagrams to see where the main fuse is located.
Check the fuse box: The main fuse may be located in the fuse box under the hood or in the cab. Check the fuse box for a large fuse that is rated at 60 amps.
Consult a technician: If you are unable to locate the main fuse, it is best to consult a qualified technician who can help you locate and replace the fuse.
Once you have located the main fuse, check it for signs of damage or burn marks. If the fuse is blown, replace it with a new one of the same amperage rating. If the fuse is not the issue, there may be a problem with the wiring or the electrical components of the mini digger, which may require further diagnosis and repair by a qualified technician.
Check the fuse box panel cover under the dash or the main fuse panel under the hood. The owners manual will help as well. You want to look for the Starter Fuse Relay Switch fuse Not the Starter Fuse. Hope that helps you out.
There is a starter relay inside the cabin. Fuse box is located on left panel down in driver's footwell . If it is still the original one it will be a light blue square fuse located at the very top of the panel and it will say starter relay.
check the starter and ignition fuse. starter fuse is located in the fuse box in your engine bay, ignition fuse is located in the kick panel which is right under your steering wheel.
starter solenoid is usually located on the starter on all GM products. There is also a starter relay in the fuse box located under the hood of your particular vehicle.
the fuse box under the hood is known as the (BJB) that is where you will find fuse for your alternator location number for the fuse is F1.10 it is a 1amp fuse, there is another fuse which is an inline fuse, most likely the one your looking for 175amp location it does not specify, but red wire comes from the battery to the starter motor, from the starter motor to the alternator, the inline fuse is in the wire from the starter to alternator, there is n location for it, but easiest way is to check for voltage at the alternator, as inline fuse will be close to there, so if your there, just check at alternator for voltage sorry it is not located in fuse box and the fuse for alternator in fuse box control the light on your dash
the only fuse for the starter is not located in the fuse box it is located in the positive wires that go to the starter its called a fusible link and when then amperage of the starter exceeds the fusible link rating the fusible link blows the link is usually located inthe positive wire to the starter and at some point fatter then the wire itself
Your Starter Relay, located in the Relay/Fuse Box/Panel is sticking and causing the Starter "Run-On".
Locate the Starter Relay in the Relay/Fuse Box/Panel.
The identification and location of the Relays/Fuses should be located in your Owners Manual, or on the inside rear Cover.
There are usually Relays in the Box/Panel which are the same Type (size and shape). Switch out the suspected bad Starter Relay with another non-engine Relay that is KNOWN to work.
Recheck the operations of both these functions.
If the Starter is not still experiencing "Run-On" and the other function is now malfunctioning. The suspected Relay is bad and needs to be replaced.
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!
1. take out your cd player or stereo
2. the starter relay will be located in that hole
3. to start you car take off the relay and conect terminals 2 and 4,and it will run again.
×