At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have removed the bottom bolt to my starter and the nut on the top bolt with the wires on it, but I can't seem to get the nut behind the wires on the top bolt loose. Does that nut turn clockwise or counter clockwise? I don't want to strip it by turning it the wrong way.I have removed the bottom bolt to my starter and the nut on the top bolt with the wires on it, but I can't seem to get the nut behind the wires on the top bolt loose. Does that nut turn clockwise or counter clockwise? I don't want to strip it by turning it the wrong way.
You can't post conmments that contain an email address.
You'll find 2 bolts that attatch the starter to the trans. housing. Remove the wiring from the starter and the bolts, one of which is towards the top of the starter and one near the bottom.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Follow the top radiator hose back to where it connect to the engine. There is a housing there that the hose connects to. There is two bolts you have to remove to get the housing off and the thermostat is underneath the housing. 4 thumbs up is appreciated if this helps.
Hi. Here is the procedure. Jack the car up,secure good with jack stands,block wheels and parking brakes on.Disconnect battery terminal,use 15mm wrench and 15mm socket,remove 2 bolts through transmission bell housing,remove nut from battery cable to starter,disconnect small wire to solenoid
There are two bolts to remove, opposite sides. One is a normal bolt, the other one is hidden by wires. Remove the nut on the ground wire, remove the ground wire, use deep socket over this to remove the bolt. It's easier than you think, about an hour and a half total.
The second bolt for the starter is directly above the starter the trick is you have to get from the top of the engine and ive learned thats its much easier if you take the driver side fan shroud out of the way it gives you much more room to work
I have removed the bottom bolt to my starter and the nut on the top bolt with the wires on it, but I can't seem to get the nut behind the wires on the top bolt loose. Does that nut turn clockwise or counter clockwise? I don't want to strip it by turning it the wrong way.
×