At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The correct head and block settings for an Isuzu KB 260 4ZE1 petrol engine will depend on the specific model and year of your vehicle. It is generally recommended to refer to the manufacturer's specifications or a repair manual for the specific head and block torque settings for your engine.
In general, the head bolts on an Isuzu 4ZE1 engine should be tightened in a specific sequence and to a specific torque specification. The block bolts should also be tightened in a specific sequence and to a specific torque specification.
It is important to follow the manufacturer's specifications and torque the head and block bolts to the correct specification to ensure proper engine function and to prevent damage. If you are unsure about the correct head and block settings for your engine, it is recommended to seek the assistance of a professional mechanic or refer to the manufacturer's specifications.
It always helps to include the engine code...
The following torque settings are used on the folowing engine codes:
ATN, AUS, AZD, BCB
This is for the Golf 4 1.6 16 valve engines
Mains:
32 Nm
65 Nm
Which engine? The diesel and gas (petrol) engines will need different torque. All three gas engines appear to call for 22 foot-pounds plus 90 degrees with threads and bearing surfaces oiled.
hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins
2nd stage 60nm leave 5 mins
3rd stage 90 degrees leave 10 mins
4th stage 90 degrees
then you are done i will try put order on here i hope this works as follows
10 4 2 6 8
front of engine back of engine
7 5 1 3 9
×