On the dash of a holden cruze (2002 Model) there is an illuminated symbol that looks like an engine, what does it mean?, Thanks Bruce

Hi Marina Would advise taking it to a workshop. The instrument cluster has to be removed for access not a big job but somewhat awkward. It is possible to cause more damage if you have never removed one. The surround comes out first then you have access to the cluster screws. when they are removed the cluster comes out, with great care and caution. Good Luck

Good Morning,
Here is some information you might want to look into regarding your handbrake.

Holden Cruze recalled because the handbrake might not work

P700 for a Chevy Cruz 1.8 is transmission control module requesting mil light illumination.

Note: DO NOT REPLACE TRANS CONTROL MODULE.
DTC P0700 IS AN INFORMATIONAL DTC . CORRECT ENGINE CONTROL OR COMMUNICATION DTC BEFORE DIAGNOSING CONTROL MODULE.
P1035 is manufacture specific . ill see if i can locate any other info for you.

I’m happy to assist further over the phone at https://www.6ya.com/expert/james_9ddabbbc483e2add

replace the 0 2 sensor
inspect the plug connection for corrosion oil or water

http://www.obd-codes.com/p0141

Do you mean bulb type? Is this the same as a Chevy Cruze. We don't have GM Holdens here.

I would be looking at your remote key , do you have a spare with good buttons and charged, also engine warning can mean a bad oil pressure spencer at the top back of the motor

Hi I have Holden Cruze 2009 suddenly the car key Connor come out an it was stuck in parking an back light also not working how can I fix the problem

Pls what does fault code 79 means on Chevrolet cruze 1.8

Hey guys!
Take a look at this great iPhone application, that will tell you all you what the lights on your dashboard means, and what to do in case its illuminated:
www.iEngineCheck.com