At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello. If change the tempature setting from hot to cold dose it click. If so you need to replace the blender door motor. If not they you need a heater core and if it's the heater core you should smell anti-freeze inside the car.
Hi, As both hoses from the heater core are hot, there is no need to replace the heater core. The problem will be in the heater control under the dash. I have no experience with Saturn, but I am responding to your problem so as not to remove the heater core.. That would be wasted time and money. The heater, A/C mixture control is the problem. Someone else will need to guide you through the rest of the way. Sorry i could not lead you all the way through. Wayne
It is probably a vacuum-controlled device; look for vacuum leaks under the hood or a ruptured vacuum reserve canister; the connectors are often fragile and break off.
This is the automotive equivalent of a ***-change operation. In short, dont do it...
The problem you have is not if the tranny will fit (which it won't as a direct bolt-in replacement), the problem is in everything else that needs to be moded. Your engines computer is not programed to recognize or work with a manual tranny. You would need to modify the console to accept a manual shifter, install a clutch and clutch pedal assembly, plumb the needed fluid systems, and replace the entire wiring harness in the engine bay. In short, if you are asking - this won't go well and even if it did work, the car would not be reliable. By the time you spend everything involved in this project, it would be much cheaper to buy a 95 or 98 Saturn with the transmission that you prefer.
disconnect battery jack up car and put it on stands. starter is on the back side of the engine disconnect the wires from the starter and remove the bolts that hold it to the trans perform the steps in reverse order to intsall. let me know if you need any more help.
If you go to your local Auto Parts store (Advanced Auto, Auto Zone, Pepboys) get the Haynes Manual for your car it tell you step by step and has some pictures too........very helpful
×