At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Open hood grab the unit where the wires go in behind the headlight push in and turn one way or the other. the bulb should pop out un-plug it and replace
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
simple fix the headlight is halogen. simply open hood , find the back of the right headlight. there is a ring with a clip holding it from turning. hold the clip and turn the ring. pull the head light bulb out and unplug it. replace in reverse order, note here. DO NOT touch the glass part of the new bulb with your fingers. use clean gloves or tissue paper to handle it. or the new bulb will fail in a short time. When replacing the retaining ring to hold the bulb in make sure you align the notches so it will press in then turn till it locks.
sounds like the fog light is shorting out the system, and if its on the same side as the headlight, the filament in the bulb could h ave received damage also check the connections on each light, and also check the bulbs with a meter
MOST NEW CARS WENT TO AN INSERT STYLE HEADLITE! YOU CAN BUY THESE AT ANY PARTS STORE, OR WAL-MART! RAISE THE HOOD, UNPLUG THE HEADLITE, AND TWIST THEM COUNTERCLOCKWISE TO REMOVE THEM!
You have to remove the dust covers by twisting them counter-clock wise. Then there is a ring that holds the bulbs to the housing that comes off by twisting it counter-clockwise.
It sounds to me that if you checked all the fuses and they are fine that it could be the headlight switch needs to be replaced or very uncommon but possible that both low beam bulbs blew at the same time and need replacement.
only the bulb need replacing and is done from back side of headlight. twist the ring on back of light about quarter turn and pullback the wire and bulb. never touch the glass on new bulb. grease from finger can cause to burn out quick or burst after a few min of operation ,use latex gloves, clean.
On the backside of the Headlight you will find the wires going through what appears to be a collar. Turn the collar counter clockwise to unlock it and pull it out, remove the bulb and insert the new one, try not to touch the new bulb on the glass.
try removing the whole light fixture and reinstalling it...that should do the trick just try to have it in the position it was in before removing so that you wouldn't have to adjust your light angel or at least make some minor adjustments
you change the bulb from inside the engine compartment . raise the hood and feel for a plastic retaining ring in the back of the headlite. Loosen 1/4 turn and bulb socket and old bulb will pull out from the headlite assembly Unplug the old bulb and replace with new one . assemble in reverse order.
×