I was looking for a diagram online showing how to replace an IAC Valve for a 2000 Chevy Tracker. The engine type is 2.0L
Idle air control. easy to replace. u will disconnect its power first.then the hose connected to it. then a way that is easy is to remove the part is the two 10mm bolts on eather side the one with the wire connected to it is a ground. after removing the bolts the part comes right off. if your not use to wrenching on things then make sure u don't strip the bolts by to much torc when u put them back on.
Drain coolant
pull hoses from iac
unbolt it.
ISC has wires, so press lock and pull connector
2,148 views
Usually answered in minutes!
The service engine soon lights comes on and off and it will until you have that valve replaced or bypass the light and the valve is actually not needed. It is easy to replace there are two bolts unscrew them and take out the old one and the screw the new one about 10 minutes of your time.
×