I have a 1994 nissan sentra 1.6 twin cam 4doors.... is not running... I suspect either broken vulves or damaged timing belt. When I try to start it, it sounds like it the belt is out of position, but I did forced it trying to start it. How would I know which of the two problem is the accurate one?

SOURCE: I have Nissan sentra GX 2002 90000Miles ,change timing belt?

I own this car, and I can say confidently that it has a timing chain instead of a belt. I believe you do not need to change the chain at any point...... it is more a matter of maintenance and repair to worn guides and tensioners.

SOURCE: 1994 nissan sentra shifting hard

change fluid in trans add lucas for trannys let me know if theres metal in the pan or if you have trouble tell fixya bout me ok

SOURCE: 2005 nissan sentra how I can replace vent vulve in

you can't if you want to do this you must replace the whole tank.

Walker

• 146 Answers
• Posted on Jul 26, 2009

SOURCE: PO300 and PO430 codes for a 2001 nissan sentra GXE

Check fuel pressure it should be 34psi and with vaccum removed from regulator it should be 43psi. Low fuel pressure can contribute to misfires.

SOURCE: 2005 Nissan Sentra 1.8S, with AC - how to replace belts?

first of all you don't have to loosen the pulley,this will no solve the problem,well you already loosen the adjuster,good,bot thing you have not done i will tell you now,on the power steering pump where the belt pass there is also a bolt that hold it ,you must loosen that also,then after you will see the pump moving on the two position that means you will see the belt loosen on 1 position an d the position it will tight the belt,try that man.............