Engines & Power (more)
Four-Wheel Drive Trims
Laredo 4WD
TSi 4WD
Limited 4WD
Orvis 4WD
Standard Engine
4.0L 185 hp I6
4.0L 185 hp I6
4.0L 185 hp I6
4.0L 185 hp I6
Horsepower
185 @ 4600 RPM
185 @ 4600 RPM
185 @ 4600 RPM
185 @ 4600 RPM
Torque (lb-ft)
220 @ 2400 RPM
220 @ 2400 RPM
220 @ 2400 RPM
220 @ 2400 RPM
Rear-Wheel Drive Trims
SOURCE: need torque specs
Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees
SOURCE: torque specs
Type: Bolt Dim: Length: Head: Hexagon Grade: 17 Ft-Lbs 204 In-Lbs 23.05 N-m Connects: Crankshaft To Connecting Rod Years: All Vote Record: Vote Note: FS - Rod Cap Bolts - 2 Step: 17FtLbs; +90deg Type: Bolt Dim: Length: Head: Hexagon Grade: 15 Ft-Lbs 180 In-Lbs 20.34 N-m Connects: Crankshaft To Engine Block Years: All Vote Record: Vote Note: FS - Main Bearing Cap Bolts - 2 Step: 15FtLbs; +90deg Type: Bolt Dim: Length: Head: Hexagon Grade: 72 Ft-Lbs 864 In-Lbs 97.62 N-m Connects: Crankshaft To Flywheel Years: All Vote Record: Vote Note: FS - Flywheel/Driveplate Bolts Type: Bolt Dim: Length: Head: Hexagon Grade: 120 Ft-Lbs 1440 In-Lbs 162.7 N-m Connects: Crankshaft To Pulley Years: All Vote Record: Vote Note: FS - Crankshaft Pulley Bolt
SOURCE: torque specs for toyota tercel
Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa. Roger
SOURCE: Torque specs for 96 Honda Accord 2.2L
the main bearings bolts is to 1st step 30Nm or 22lbs ft and the last step is 75Nm or 54lbs ft in this tighten secuence. 9 3 1 5 7 on the top bolts and........ ........ ........ ... 8 6 2 4 10 botton bolts and the connecting rod 45Nm or 34 lbs ft i hope be help you
636 views
Usually answered in minutes!
×