I need an owner's manual for a 2001 Toyota Echo

SOURCE: 2001 Toyota Echo Fuel consumption

I hav a toyota echo 2001 with 108,000 millage.Recently when i just starting to drive there is some noise coming frpm rt front side ,but not offen only some times even this is not related to speeding can start with 0-5 mile/h. its seems to be broken something (like clicking noise). I checked with all repair stores, pepboys unfortunatly no body knowes what is wrong with this car.some of them saying it is axel or strut or bearing problem some of them do not know.please help me what to do ? if htis is save to drive?

SOURCE: replace belt on 2001 toyota echo

that belt is wrapped around the alternator which is located on the passenger side of the engine compartment. loosen the alternator to remove belt. Wrap belt around pulleys and pull the belt tight but adjusting the alternator.

SOURCE: set clock on echo 2001

Hi banksiah,
Turn the radio off.
Press 4 and while holding it press seek up. The clock will reset to 1:00.
To adjust the hour press and hold AM and then 1.
To adjust the minute press and hold AM and then 2.
Turn the radio on when finished.
I hope this helps

SOURCE: broken alternator belt, need info on replacement,

go to toyota buy a fan belt, i think u can see a belt adjuster need the belt and engine , you just need to adjust the belt to very good tension

SOURCE: Need a altertator belt diagram for a 2001 Toyota

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/2001/make/toyota/model/echo/2001_toyota_echo_drive_belt_routing_diagram.htm