On My Bmw 5 2004 series Tourer my offside reverse + fog lights have stopped working. bulbs + fuse ok.Could a wire be trapped in the hinge of the tailgate? If so how do i rectify? Cheerrs Phil
Is this an X5? is so most likely it is the contact points on the bulb itself take a flash light and look inside the tail light assembly at all the contact points of the affected bulbs
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
bmwguide.nethttps://bmwguide.net > 3 Series > E46
Jan 17, 2023 - The main fuse box is located in the glove compartment. You will see two white latches (left and right) that need to be turned to open the fuse ...
Hey I'm having the same problem with my BMW 320d 2005 car. Fuses, switches ,bulbs are all fine abd reversing lights still not working . Please help me out
Try and see what happens when you put it in REVERSE? There are many American Vehicles that the light only works when you are in Reverse to see what is behind you
Hi There. Im not sure where you are but this is the sequence for the UK< Hope it helps. here are the 7 cable locations and pin numbers.
Pin 1 Yellow L/H Direction Indicator Pin 2 Blue Rear Fog Lamps Pin 3 White Earth Return Pin 4 Green R/H Direction Indicator Pin 5 Brown R/H Tail & No, Plate Light Pin 6 Red Stop Lamps Pin 7 Black L/H Tail & No, Plate Lights
I found the easiest way to locate the correct wires in the loom is to turn on the lights required and use a circuit tester and splice into the main loom where you have enough wire to play with. Try not to cut the loom as it only causes more problems with bad connections and joins.( Good Luck
Check the wires that come through the tailgate, constant flexing may cause a brakw in one of the wires also with all these stopping at the same time they probably share the same ground. If you apply a ground wire to the circuit and it works you must find where it is broken and repair it.
Have had this problem. Solve it by reading the owner's handbook, which gives clear instructions. Do not use the key in the tailgate door before reading the instructions.
Tommy owner of 1996 model
×