2000 Ford Crown Victoria Logo
Anonymous Posted on Nov 10, 2010

2000 ford crown vic, park lamps come on, but no headlamps

2 Answers

Gayle

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

  • Ford Expert 102 Answers
  • Posted on Aug 17, 2015
Gayle
Ford Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Joined: Mar 16, 2014
Answers
102
Questions
33
Helped
57262
Points
263

Usually it's a case of the regular headlights not working while the high beams (brights) still work if you hold them on while driving, but if you have a 1999-2011 Mercury Marquis, Mercury Marauder, or Crown Victoria, and your regular headlights and or tail lights don't work it probably is your LCM that used to cost around $1,000 to repair.

The good news now is that Ford just finally extended the warranty on your LCM (Lighting Control Module) for free - both parts and labor and will install a new one for free! Ford has extended the warranty to 15 years/250,000 miles. THIS IS NOT A RECALL! They do not advertise this.

Your regular headlights must be inoperable in order to get a new LCM on this new extended warranty. It must be done at a Ford Dealer and the fix is free. Call your local Ford Dealer and tell them you need to make an appointment because your headlights don't work and that Ford has extended your warranty on the LCM.

They may act like they don't know what you are talking about, so tell them it is the Customer Satisfaction Program 14N01. Have your car's Vin number ready as they will ask for it. You don't have to be the original owner. If they still act like they don't know what you are talking about ask to talk to the manager or tell them to call Ford Motor Company and ask them, or you can call Ford yourself.

We had ours done at a Ford dealer in August of 2014 in Scottsdale, AZ but first they checked out our LCM first to make sure it didn't work. As soon as they found out it didn't work, the installed a new LCM for free under the about new warranty called "Customer Satisfaction Program 14N01".

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 2,317 Answers
  • Posted on Nov 10, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Mar 05, 2010
Answers
2317
Questions
1
Helped
788106
Points
7079

It sounds like you might have a bad headlight switch. I've seen alot of them go bad. I would check the headlight fuses.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Parking light fuse location in 2000 Ford F250 Super duty

  • Power distribution box (BJB) Fuse 8 (15A) (underhood fuse box )
  • Any other light's not working ? headlamps ,license plate light's ?
  • Symptom Chart Condition Possible Sources Action
    • The parking, rear or license lamps are inoperative
    • BJB Fuse 8 (15A) (Super Duty and Excursion).
    • BJB Fuse 6 (20A) (Motorhome).
    • Circuitry.
    • Headlamp switch.
    • GO to Pinpoint Test R .
0helpful
2answers
0helpful
1answer

I have a 2000 Crown Vic and occasionally there is white smoke coming from drivers side(closest to me) just minutes into driving. Its only noticeable while at a light or when parked and I have just cut

after driving the car to normal temp...go drive around and when you do see smoke like that, pull over into parking lot (leave the car running) and look underneath the car and hood...see where the smoke coming from. Then you would know the answer.
0helpful
1answer

Why my 2007 police crown Vic won't shift out of

All 2000 and up vehicles utilize a Solenoid which is powered by depressing the Brake Pedal to allow the Shift Lever to be move from Park to any other position. Is the Shift Lever located on the Steering Column or the Floor? In either case typically the Solenoids used by Ford do occasionally go bad. I highly recommend having a certified technician replace the solenoid.
0helpful
1answer

Head lights will not come on 2003 crown vic

faulty headlamp switch most likely since the car is getting older. check the fuse first before you purchase a new switch
0helpful
1answer

How to change a front turn light in a 1996 taurus.

Lamps, Parking Front Lamp-Lamp Assembly, Taurus
Removal and Installation
  1. Remove Headlamp (13008) as outlined.
Headlamp Assembly
Removal and Installation
  1. ani_caut.gif WARNING: THE REPLACEABLE HALOGEN HEADLAMP BULB CONTAINS GAS UNDER PRESSURE. THE HALOGEN HEADLAMP BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR THE HALOGEN HEADLAMP BULB IS DROPPED. HANDLE HALOGEN HEADLAMP BULB CAREFULLY. GRASP HALOGEN HEADLAMP BULB ONLY BY ITS PLASTIC BASE. AVOID TOUCHING GLASS ENVELOPE. KEEP HALOGEN HEADLAMP BULB OUT OF REACH OF CHILDREN.
    Position headlamp switch (11654) and headlamp time delay switch (13736) in the OFF position.
  1. Remove two bolts retaining headlamp (13008) to upper support assembly and loosen pinch bolt. Remove headlamp assembly from vehicle.
  1. Remove park lamp bulb and socket (Sable only) and headlamp bulb and socket from Headlamp Assembly as outlined.


    Headlamp Assembly (Taurus Shown, Sable Similar)


    k24744a.gif
  1. Turn lamp socket and wiring (13410) assembly 1/2 turn counterclockwise and remove from parking lamp (13200) housing.
  1. Remove screw from park/turn signal housing.
  1. Using 1/4 inch drive socket extension and swivel, insert tool through two access holes in upper radiator support. Remove screws from park/turn signal housing.
  1. Remove parking lamp from vehicle.
  1. To install, reverse Removal procedure.


    Front Lamp-Lamp Assembly, Taurus


    k23818a.gif
0helpful
1answer

My headlights and dashboard stopped working on my 99 crown victoria, how do i fix it

Possible failure of the park/headlamp fuse which is in the main fuse box located under the dashboard.
Look underr the inscription of park lamp/H lamp for the blown fuse and change with the spare.
2helpful
1answer

2000 crown vic police interceptor bypass a/c clutch pulley

you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,
1helpful
2answers

1999 ford crown vic dash light running light problem.

Check all the bulbs at tail end for parking and brakes, test grounds and harness for trailer. Check fuses. clean batery terminals, Re instal head light swich properly and make sure all wires conect.
Vitally
Not finding what you are looking for?

177 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...