I have a 1999 Chrysler Town and Country minivan with a factory alarm. The alarm is malfunctioning. When we went to start the van it would run for a few seconds and stop. Then after a couple of tries the engine would not crank but dash lights are on. (Battery has a full charge.) We tried to reset the alarm by unlocking with the remote. Opening the passenger door with a key used to work to reset alarm but now nothing works. Do you have a suggestion? Can I disable the alarm?

SOURCE: fuse for stereo/cd in chrysler town and country minivan

Its in the box next to the battery and i had the same problem.The fuse is on the first line top.

Thanks

SOURCE: On Chrysler Town and Country van keys were locked in the car and

does this van have factory theft device? if so you may have to reset to get the ramp working

SOURCE: My car alarm will not reset and the issue with problems below

If you (hopefully) have the key fob (keyless entry remote), try closing the doors, then lock and unlock using the keyless entry. This should reset the security so the vehicle will start.

SOURCE: I have a 1999 chrysler town and country that will

Verify around the steering column, if you see a square black box with a big plug into it, disconect the plug and try to start the car.

SOURCE: Passenger power window will not open.

We have had this happen in every town and country and caravan that we have owned. They will tell you that the window motor needs replaced. It will work for a while and then break again. Did I mention that the price tag to fix it is pretty hefty? A friend of mine told me that he fixed his with a salvaged window motor for a fraction of the price. The motor is obviously defective though if it breaks so easily.