At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Disconnect the negative battery cable.
NOTE: This procedure is for power mirrors. The procedure for a manual mirror is the same with the exception of the lack of electrical wiring.
Remove the door trim panel, plastic fasteners from the sound insulator and water deflector, as required.
Unfasten the retainer, then remove the mirror trim panel.
Fig. 1: The outside mirror has a trim panel which is secured with a screw and a retaining clip
Fig. 2: Unfasten the retaining screw . . .
Fig. 3: . . . then remove the mirror finish panel. Note the panel retaining clip (How to replace side mirror - 89630p10.jpg
Disconnect the wiring connector and remove the wiring from the door retaining tabs.
Fig. 4: Exploded view of the outside mirror cable routing
Remove the mirror retaining nuts/screws, then remove the mirror with insulator and wiring.
How to replace side mirror - 89630p11.jpgg. 5: Pull the sound absorber filler pad out of the door
Fig. 6: Unfasten the side view mirror retaining nuts and bolts
Fig. 7: ExploHow to replace side mirror - 89630g18.jpgthe outside mirror assembly mounting
To install:
Refit the mirror with insulator and wiring into position.
Install the mirror retaining nuts/screws.
Route the wiring through the door retaining tabs and reconnect the electrical connector. Make certain the wiring harness does not interfere with the window glass operation.
Install the water deflector, sound insulatHow to replace side mirror - prev.gifoor trim panel, as required.
Click on the X's to view the diagrams, if not copyrighted and blocked.
One can go to alldata.com or repairpath.com to get diagrams for a fee.Click on the X's to view the diagrams, if not copyrighted and blocked.
One can go to alldata.com or repairpath.com to get diagrams for a fee.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the mirror housing is in place, Have one cut to fit. Glue it in. If the housing is broken, replace all of it. You can't fix a broken side mirror. Tried to many times.
? 8:16
https://www.youtube.com/watch?v=Bmm9M28dqv4
Mar 10, 2014 - Uploaded by bimmermerchant
BMW 540i Side View Mirror Removal 525i 530i. bimmermerchant ..... A truck recently side swiped my ...
? 2:31
https://www.youtube.com/watch?v=uUcpzHx2ZR0
Jan 6, 2013 - Uploaded by AutoandTruckMirrors
This How To video offers you easy step by step instructions on how to remove and replace a broken side ...
? 13:58
https://www.youtube.com/watch?v=ldjeQsnAJ9M
Jan 26, 2014 - Uploaded by Daniel Scheer
This video is a step by step instruction for the removal andreplacement of the side mirror on a 1996-2007 ...
? 3:00
https://www.youtube.com/watch?v=saIEH-CxRkY
Aug 10, 2014 - Uploaded by DIY Mechanics
VW Golf MK4 - how to remove/replace door wing mirror video ... How To install Replace Side rear View ...
? 3:46 https://www.youtube.com/watch?v=77lBQ_CRqdo
Apr 10, 2012 - Uploaded by GregHint
See how even a novice can repair a passenger mirror on a FordEscape. ... Replace Your Car Passenger Side Mirror - How To - DIY .... Replace 2003-2008 Toyota Corolla Side Mirror, How to Change Install 2004 2005 2006
About 22,000 results (0.61 seconds) Search ResultsHow-To: Replace Ford Fusion side mirror (HD) - YouTube? 7:27https://www.youtube.com/watch?v=iGHeXUbvvJsMay 7, 2014 - Uploaded by Derrick HardingFord Fusion SEL 3.0 Liter V6 How to fix broken side mirrorIncludes: ... Published on May 7, 2014 ..... Great instructions - just replaced the driver's side mirror on my 2007 Fusion following your instructions. ... Front brake pad replacement 2006 - 2012 Ford Fusion Lincoln Mazda Pads Rotor Install Remove ...
? 10:31
https://www.youtube.com/watch?v=tuGFzxCVh7k
May 8, 2012 - Uploaded by 1A Auto Parts
In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, smashed, cracked, or ...
? 14:20
https://www.youtube.com/watch?v=UKLPkZszbrA
Sep 25, 2013 - Uploaded by Go-Parts
Side Mirror purchased from www.Go-Parts.com Links to purchase products: ...
check owners manual the side mirror housing has to be removed before you can replace leds lights on side mirror.you can look on you tube for procedures replacing side mirror leds lights inside mirror.
i just replaced the passenger side on mine and this is what i did.
1. on the back side of the mirror housing is a half moon shaped plastic piece. gently remove that from the housing, exposing a portion of the back side of the mirror.
2. disconnect the two wires (remember rt and lf). carefully, with a pry tool, apply pressure on the center of the back side of the mirror, it will pop loose.
3. once the mirror is off there should be a round plastic piece attached to the back side of the mirror. on the passenger side there is a tab in the upper left side. lift up on the tab and slide the plastic piece down...it should slide off.
4. once you have the plastic piece off it goes on the back of the new mirror in the opposite way. you line up the four cross tabs and slide the mirror up until the tab grabs it.
5. put the mirror back in the housing by lining the circle (on back side center of mirror plate) with the center of the mirror housing. genlty apply pressure on the center of the mirror (i had to hit it firmly with the palm of my hand) unitl it snaps into place.
6. once it snaps into place you can reconnect the two wires to the back of the mirror and install the back side plastic housing......DONE
Removal & Installation
The door outside mirrors are stud mounted to the door filler. The mirror glass face may be replaced by placing a piece of tape over the glass then breaking the mirror face. Adhesive back mirror faces are available. Left side flat and right side convex mirror faces must be replaced with the same type mirror face when surfaced.
Remove the door trim panel.
Remove the upper trim panel.
Remove the sound absorber.
Remove the (3) nuts.
Remove the control cable from the upper trim panel.
Remove the filler and mirror.
To install:
Place the filler over the studs on the mirror.
Install the control cable through the filler and connect to the upper trim panel.
Install the (3) retaining nuts and tighten to 42-72 inch lbs. (4.7-8.1 Nm).
Install the sound absorber, upper trim panel and trim panel.
the door panel near the mirror must be removed if not the entire door panel inside u will find 3 nuts to remove to get the old mirror off. hope this helps please rate me
×